All MIBs › A3COM-HUAWEI-DEVICE-MIB
Organization: Hangzhou H3C Technologies Co., Ltd.
Last Updated: 2009-03-19
Category: Device Management, Vendor: H3C/HH3C
Description:
Provides system-level device inventory, slot, and entity management objects for H3C network platforms.
Imported Objects
From A3COM-HUAWEI-OID-MIB
| lswCommon | OBJECT-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| TEXTUAL-CONVENTION |
What Is A3COM-HUAWEI-DEVICE-MIB?
A3COM-HUAWEI-DEVICE-MIB is an enterprise MIB module co-branded for the 3Com-Huawei (H3C) joint venture, providing system-level device inventory, slot, and entity management objects for the H3C family of enterprise network switches and routers. It covers categories of data such as chassis and slot identification, physical entity naming, and general hardware inventory attributes used to describe the composition of an H3C device. Its monitoring role centers on hardware and system status: it is used to track slot occupancy, entity presence and type, and overall device inventory so that operators can detect a missing, mismatched, or newly inserted line card, power supply, or module. It depends on conventions consistent with the standard IETF ENTITY-MIB for physical entity numbering and fits into the broader H3C/Huawei enterprise MIB suite for fuller device management. Network administrators loading this module in an A3COM-HUAWEI-DEVICE-MIB MIB Browser view typically do so to inspect slot and entity inventory on H3C switches and routers deployed in enterprise and campus network environments.
IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-DEVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- device/entity inventory
- slot occupancy status
- hardware component presence and type
- system identification
Supported Devices
- H3C S9800 Series — modular data center core switch, part of H3C's 800G-capable lineup
- H3C S6520 Series — enterprise access/aggregation switch
Monitoring Examples
No concrete sample objects were provided for this module, so specific table or object names cannot be cited directly. Based on its stated purpose of system-level device inventory, slot, and entity management, a real deployment would poll objects analogous to the standard ENTITY-MIB's entPhysicalTable to enumerate installed slots, modules, and their type/serial information on an H3C chassis. An administrator would compare the returned entity/slot inventory against an expected baseline to detect a missing or newly inserted line card, power supply, or fan module. Without named objects, this description is grounded in the module's stated inventory-management intent rather than confirmed object identifiers.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwLswDeviceAdmin | 1.3.6.1.4.1.43.45.1.2.23.1.18 | The latest baseline. | ||
| hwLswSystemPara | 1.3.6.1.4.1.43.45.1.2.23.1.18.1 | |||
| IP hwLswSysIpAddr | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.1 | IpAddress | read-only | System IP address, which is the primary IP address of the VLAN interface that has smallest VLAN ID and is configured IP address. |
| IP hwLswSysIpMask | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.2 | IpAddress | read-only | Mask of the system IP address. |
| I32 hwLswSysCpuRatio | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.3 | Integer32 | read-only | CPU usage of the system in accuracy of 1%, and the range of value is 1 to 100. |
| STR hwLswSysVersion | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.4 | DisplayString | read-only | Information of the system version. |
| DAT hwLswSysTime | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.5 | DateAndTime | read-write | System time. |
| INT hwLswSysUNMCastDropEnable | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.6 | INTEGER | read-write | Enable or disable discarding of unknown multicast packet. |
| I32 hwLswSysManagementVlan | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.7 | Integer32 | read-write | System management VLAN. |
| STR hwLswSysVlanRange | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.8 | DisplayString | read-write | System VLAN range, if set VLAN range, must bind mangement IP/Mask. |
| IP hwLswSysManagementIpAddr | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.9 | IpAddress | read-write | System IP address. |
| IP hwLswSysManagementIpMask | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.10 | IpAddress | read-write | Mask of the system IP address. |
| I32 hwMacAddressCountPort | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.11 | Integer32 | read-only | Supportted MAC address number on port. |
| I32 hwMacAddressCountMachine | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.12 | Integer32 | read-only | Supportted MAC address number on machine. |
| U32 hwLswSysPhyMemory | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.13 | Unsigned32 | read-only | The memory of physical. For the distributed device, it represents the memory size on the master slot. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hwLswSysMemory | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.14 | Unsigned32 | read-only | The memory of system. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hwLswSysMemoryUsed | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.15 | Unsigned32 | read-only | The system memory in use. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hwLswSysMemoryRatio | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.16 | Unsigned32 | read-only | The percentage of system memory in use. Note that the system memory means the memory can be used by the software platform. hwLswSysMemoryUsed hwLswSysMemoryRatio = -------------------- hwLswSysMemory For the distributed device, it represents the memory used ratio on the master slot. |
| I32 hwLswSysTemperature | 1.3.6.1.4.1.43.45.1.2.23.1.18.1.17 | Integer32 | read-only | The temperature of system. For the distributed device, it represents the temperature on the master slot. |
| hwLswSlotConf | 1.3.6.1.4.1.43.45.1.2.23.1.18.4 | |||
| hwLswFrameTable | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.2 | not-accessible | Frame information table. | |
| hwLswFrameEntry | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.2.1 | not-accessible | Frame description table entry. | |
| I32 hwLswFrameIndex | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.2.1.1 | Integer32 | read-only | The unique index of frame. |
| I32 hwLswFrameType | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.2.1.2 | Integer32 | read-only | Frame type. |
| STR hwLswFrameDesc | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.2.1.3 | DisplayString | read-write | Frame description. |
| I32 hwLswSlotNumber | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.2.1.4 | Integer32 | read-only | Number of slots of the current frame. |
| INT hwLswFrameAdminStatus | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.2.1.5 | INTEGER | read-only | The Status of frame. |
| hwLswSlotTable | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3 | not-accessible | Slot description table. | |
| hwLswSlotEntry | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1 | not-accessible | Slot description table entry. | |
| I32 hwLswSlotIndex | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.1 | Integer32 | read-only | Slot index. When the slot is empty, listed as vacant slot. |
| HWL hwLswSlotType | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.2 | HwLswTypeOfSlot | read-only | Slot type. BOM number is recommended. |
| STR hwLswSlotDesc | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.3 | DisplayString | read-write | Slot description. |
| I32 hwLswSlotCpuRatio | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.4 | Integer32 | read-only | CPU usage of the slot in accuracy of 1%, and the range of value is 1 to 100. |
| STR hwLswSlotPcbVersion | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.5 | DisplayString | read-only | Hardware version of the board. |
| STR hwLswSlotSoftwareVersion | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.6 | DisplayString | read-only | Software version of the board. |
| I32 hwLswSubslotNumber | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.7 | Integer32 | read-only | Number of the cards of the board. |
| INT hwLswSlotAdminStatus | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.8 | INTEGER | read-only | Slot status. |
| INT hwLswSlotOperStatus | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.9 | INTEGER | read-write | Slot operation status. |
| U32 hwLswSlotPhyMemory | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.10 | Unsigned32 | read-only | The memory of physical on the board. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hwLswSlotMemory | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.11 | Unsigned32 | read-only | The memory of system on the board. Note that the system memory means the memory can be used by the software platform. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hwLswSlotMemoryUsed | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.12 | Unsigned32 | read-only | The system memory in use on the board. Note that the system memory means the memory can be used by the software platform. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes. |
| U32 hwLswSlotMemoryRatio | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.13 | Unsigned32 | read-only | The percentage of system memory in use on the board. Note that the system memory means the memory can be used by the software platform. |
| I32 hwLswSlotTemperature | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.3.1.14 | Integer32 | read-only | The temperature of system on the board. |
| hwLswSubslotTable | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.4 | not-accessible | Subslot description table. | |
| hwLswSubslotEntry | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.4.1 | not-accessible | Subslot description table entry. | |
| I32 hwLswSubslotIndex | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.4.1.1 | Integer32 | read-only | Subslot index. |
| HWL hwLswSubslotType | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.4.1.2 | HwLswTypeOfSlot | read-only | Type of the pinch board in the subslot. |
| I32 hwLswSubslotPortNum | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.4.1.3 | Integer32 | read-only | Number of physical ports in the pinch board. |
| INT hwLswSubslotAdminStatus | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.4.1.4 | INTEGER | read-only | Status of the pinch board in the subslot. |
| I32 hwLswSubslotFirstIfIndex | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.4.1.5 | Integer32 | read-only | The value of ifIndex of the first physical port in the pinch board. |
| hwLswPortTable | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.5 | not-accessible | Port configuration table. | |
| hwLswPortEntry | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.5.1 | not-accessible | Port configuration table entry. | |
| I32 hwLswPortIndex | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.5.1.1 | Integer32 | read-only | The port number on the device. The first port number is 1, which is reserved if the port does not exist. |
| INT hwLswPortType | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.5.1.2 | INTEGER | read-only | Normally the port type is the same as its card type. When there are different types of ports in one card, use the actual port type. |
| I32 hwLswPortIfindex | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.5.1.3 | Integer32 | read-only | The value of ifIndex of the port. |
| INT hwLswPortIsPlugged | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.5.1.4 | INTEGER | read-only | Port is plugged or not. |
| hwLswPortLoopbackTable | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.6 | not-accessible | Port loopback test table. | |
| hwLswPortLoopbackEntry | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.6.1 | not-accessible | Port loopback test table entry. | |
| INT hwLswPortLoopbackIsSupport | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.6.1.1 | INTEGER | read-only | The loopback type can be supported by current port. |
| INT hwLswPortLoopbackOperate | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.6.1.2 | INTEGER | read-write | Port loopback operate type. Read operation not supported. |
| INT hwLswPortLoopbackResult | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.6.1.3 | INTEGER | read-only | Loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. |
| INT hwLswPortLoopbackAutoStopSupport | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.6.1.4 | INTEGER | read-only | Whether this port support NEED-MANNUL-NOLOOP mode or not. |
| INT hwLswPortLoopbackRemoteResult | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.6.1.5 | INTEGER | read-write | The remote loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. |
| INT hwLswPortLoopbackLocalResult | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.6.1.6 | INTEGER | read-write | The local loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. |
| INT hwLswPortLoopbackInternalResult | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.6.1.7 | INTEGER | read-write | The internal loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. |
| INT hwLswPortLoopbackExternalResult | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.6.1.8 | INTEGER | read-write | The external loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. |
| hwLswFabricTable | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.7 | not-accessible | This table contains the information of fabric. | |
| hwLswFabricEntry | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.7.1 | not-accessible | An entry in hwLswFabricTable. | |
| I32 hwLswFabricChannelIndex | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.7.1.1 | Integer32 | not-accessible | The channel number of fabric. |
| I32 hwLswFabricUtilIn | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.7.1.2 | Integer32 | read-only | Ingress utilization of fabric. |
| I32 hwLswFabricUtilOut | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.7.1.3 | Integer32 | read-only | Egress utilization of fabric. |
| I32 hwLswFabricPeakIn | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.7.1.4 | Integer32 | read-only | Ingress peak of utilization for fabric. |
| DAT hwLswFabricPeakInTime | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.7.1.5 | DateAndTime | read-only | Ingress peak time of utilization for fabric. |
| I32 hwLswFabricPeakOut | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.7.1.6 | Integer32 | read-only | Egress peak of utilization for fabric. |
| DAT hwLswFabricPeakOutTime | 1.3.6.1.4.1.43.45.1.2.23.1.18.4.7.1.7 | DateAndTime | read-only | Egress peak time of utilization for fabric. |
RFC description
3Com Huawei device management MIB for legacy 3Com-Huawei network equipment.
Start monitoring H3C S-series switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.