26 modules from Bay Networks
Bay Networks' MIBs here are mostly the Rapid-City (RC-*-MIB) family for the Accelar/Ethernet Routing Switch chassis line, plus a couple of early LanCity cable-modem/CMTS modules from Bay's separate broadband-access business. Bay Networks was absorbed into Nortel (several module descriptions call the same hardware "Bay Networks/Nortel Accelar"), and the Rapid-City line's SLPP loop-prevention module even carries a later "Nortel/Avaya" attribution, so treat this as a legacy vendor whose product line lives on under later Nortel/Avaya names. The RC-* modules cover a full L3 switch-router feature set - bridging/STP, ARP, static and dynamic IP routing (RIP, BGP, PIM), MPLS/RSVP/LDP, multi-link trunking, QoS queue mapping, IGMP snooping, IPFIX flow export, and AAA (RADIUS/TACACS+) - reflecting a chassis-based routing switch rather than a simple access switch. Look here if you're maintaining older Bay Networks/Nortel Accelar or Passport routing-switch hardware and need its Rapid-City-era configuration MIBs.
| Module | Description |
|---|---|
| RAPID-CITY | Provides the base MIB framework for Bay Networks Rapid-City ERS switch management. |
| RC-2K-ATM-MIB | Manages ATM module configuration, virtual circuits, and statistics on Bay Networks Rapid-City 2000 series switches. |
| RC-2K-MIB | Provides general switch management objects for the Bay Networks Rapid-City 2000 series Ethernet routing switch platform. |
| RC-2K-QOS-MIB | Handles Quality of Service policy configuration and traffic classification on Bay Networks Rapid-City 2000 series switches. |
| RC-ARP-MIB | Manages ARP table entries, proxy ARP, and gratuitous ARP configuration on Bay Networks Rapid-City series switches. |
| RC-BRIDGE-MIB | Manages bridge forwarding database, spanning tree, and MAC learning on Bay Networks Rapid-City series switches. |
| RC-DIAG-MIB | Provides diagnostic test management including loopback and self-test operations on Bay Networks Rapid-City series switches. |
| RC-ERROR-MIB | Manages error logging, error counters, and error threshold alarms on Bay Networks Rapid-City series switches. |
| RC-IGMP-MIB | Handles IGMP snooping, querier configuration, and multicast group membership on Bay Networks Rapid-City series switches. |
| RC-IP-BGP-MIB | Manages BGP peer configuration, session state, and prefix statistics on Bay Networks Rapid-City series routing switches. |
| RC-IP-MIB | Manages IP interface configuration, routing tables, and address management on Bay Networks Rapid-City series switches. |
| RC-IP-MPLS-MIB | Manages MPLS label switching, LSP configuration, and forwarding entries on Bay Networks Rapid-City series switches. |
| RC-IP-PIM-MIB | Manages PIM multicast routing, rendezvous points, and neighbor state on Bay Networks Rapid-City series switches. |
| RC-IP-ROUTING-MIB | Manages IP unicast routing configuration, static routes, and route redistribution on Bay Networks Rapid-City series switches. |
| RC-IP-UDP-MIB | Manages UDP helper addresses and broadcast forwarding configuration on Bay Networks Rapid-City series switches. |
| RC-IPFIX-MIB | Manages IPFIX and NetFlow traffic flow export configuration and statistics on Bay Networks Rapid-City series switches. |
| RC-IPV6-MIB | Manages IPv6 interface addressing, neighbor discovery, and routing on Bay Networks Rapid-City series switches. |
| RC-MLT-MIB | Manages Multi-Link Trunking (MLT) group configuration and member port status on Bay Networks Rapid-City series switches. |
| RC-NTP-MIB | Manages NTP server configuration, synchronization status, and time source selection on Bay Networks Rapid-City series switches. |
| RC-PORT-MIB | Handles physical port configuration, speed/duplex settings, and traffic statistics on Bay Networks Rapid-City series switches. |
| RC-POS-MIB | Handles Packet over SONET (POS) interface configuration, framing, and alarm status on Bay Networks Rapid-City switches. |
| RC-RADIUS-MIB | Manages RADIUS server configuration and authentication accounting on Bay Networks Rapid-City series switches. |
| RC-RIP-MIB | Manages RIP routing protocol configuration, neighbor tables, and route updates on Bay Networks Rapid-City series switches. |
| RC-SLPP-MIB | Manages Simple Loop Prevention Protocol (SLPP) configuration and port blocking state on Bay Networks Rapid-City switches. |
| RC-TACACS-MIB | Manages TACACS+ server configuration and authentication accounting on Bay Networks Rapid-City series switches. |
| RC-VLAN-MIB | Manages VLAN creation, port membership, and tagging configuration on Bay Networks Rapid-City series switches. |