All MIBs › ZhoneDsl-MIB › zhoneHdsl2RmtProviderCode
zhoneHdsl2RmtProviderCode
Module: ZhoneDsl-MIB
OID (symbolic): ZhoneDsl-MIB::zhoneHdsl2RmtProviderCode
OID (numeric): 1.3.6.1.4.1.5504.5.4.4.1.9
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Provider word of the remote unit.
What is zhoneHdsl2RmtProviderCode?
Reports the provider identification word transmitted by the remote HDSL2 unit, a vendor/service-provider identifier an admin can use to confirm what equipment is on the far end of the line.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.5.4.4.1.9 snmpwalk -v2c -c public <target> ZhoneDsl-MIB::zhoneHdsl2RmtProviderCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.5.4.4.1.9.1 snmpget -v2c -c public <target> ZhoneDsl-MIB::zhoneHdsl2RmtProviderCode.1
Start monitoring Zhone HDSL/HDSL2/SDSL/G.SHDSL line card or CPE (line-rate/signal-quality/error-counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZhoneDsl-MIB::zhoneHdsl2RmtProviderCode OID value, configure state conditions and alerts, and monitor any Zhone HDSL/HDSL2/SDSL/G.SHDSL line card or CPE (line-rate/signal-quality/error-counter status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.5 | zhonePhysical | Zhone |
| 1.3.6.1.4.1.5504.5.4 | zhoneDsl | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.5.4.4 | zhoneHdsl2StatusTable | ZhoneDsl-MIB |
| 1.3.6.1.4.1.5504.5.4.4.1 | zhoneHdsl2StatusEntry | ZhoneDsl-MIB |
| 1.3.6.1.4.1.5504.5.4.4.1.9 | zhoneHdsl2RmtProviderCode | ZhoneDsl-MIB |