All MIBs › ZhoneDsl-MIB › zhoneHdsl2DriftAlarm

zhoneHdsl2DriftAlarm

OID (symbolic): ZhoneDsl-MIB::zhoneHdsl2DriftAlarm

OID (numeric): 1.3.6.1.4.1.5504.5.4.4.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Indicates that the framer automatically attempted to adjust for clock drift. This is not applicable for ATM.

What is zhoneHdsl2DriftAlarm?

Reports whether the HDSL2 framer has had to automatically correct for clock drift on the receive side, transmit side, both, or neither, a signal-quality indicator not applicable when the line is running in ATM mode.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.5.4.4.1.1
snmpwalk -v2c -c public <target> ZhoneDsl-MIB::zhoneHdsl2DriftAlarm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.5.4.4.1.1.1
snmpget -v2c -c public <target> ZhoneDsl-MIB::zhoneHdsl2DriftAlarm.1

Start monitoring Zhone HDSL/HDSL2/SDSL/G.SHDSL line card or CPE (line-rate/signal-quality/error-counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZhoneDsl-MIB::zhoneHdsl2DriftAlarm OID value, configure state conditions and alerts, and monitor any Zhone HDSL/HDSL2/SDSL/G.SHDSL line card or CPE (line-rate/signal-quality/error-counter status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.5504	Zhone	BITSTORM-HP-160-MIB
1.3.6.1.4.1.5504.5	zhonePhysical	Zhone
1.3.6.1.4.1.5504.5.4	zhoneDsl	Zhone

Numeric OID	Name	Module
1.3.6.1.4.1.5504.5.4.4	zhoneHdsl2StatusTable	ZhoneDsl-MIB
1.3.6.1.4.1.5504.5.4.4.1	zhoneHdsl2StatusEntry	ZhoneDsl-MIB
1.3.6.1.4.1.5504.5.4.4.1.1	zhoneHdsl2DriftAlarm	ZhoneDsl-MIB

ZhoneDsl-MIB :: zhoneHdsl2DriftAlarm

zhoneHdsl2DriftAlarm

Module

This MIB depends on