All MIBs › ZhoneDsl-MIB › zhoneDslLineStatus
zhoneDslLineStatus
Module: ZhoneDsl-MIB
OID (symbolic): ZhoneDsl-MIB::zhoneDslLineStatus
OID (numeric): 1.3.6.1.4.1.5504.5.4.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The DSL modem status. Detailed modem state maybe available in the status table.
What is zhoneDslLineStatus?
Reports the current operational state of this DSL modem - down, downloading firmware, activated, training, or fully up - the primary health check an admin polls to see whether the line is actually passing traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.5.4.1.1.3 snmpwalk -v2c -c public <target> ZhoneDsl-MIB::zhoneDslLineStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.5.4.1.1.3.1 snmpget -v2c -c public <target> ZhoneDsl-MIB::zhoneDslLineStatus.1
Start monitoring Zhone HDSL/HDSL2/SDSL/G.SHDSL line card or CPE (line-rate/signal-quality/error-counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZhoneDsl-MIB::zhoneDslLineStatus OID value, configure state conditions and alerts, and monitor any Zhone HDSL/HDSL2/SDSL/G.SHDSL line card or CPE (line-rate/signal-quality/error-counter status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.5 | zhonePhysical | Zhone |
| 1.3.6.1.4.1.5504.5.4 | zhoneDsl | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.5.4.1 | zhoneDslLineTable | ZhoneDsl-MIB |
| 1.3.6.1.4.1.5504.5.4.1.1 | zhoneDslLineEntry | ZhoneDsl-MIB |
| 1.3.6.1.4.1.5504.5.4.1.1.3 | zhoneDslLineStatus | ZhoneDsl-MIB |