All MIBs › ZYXEL-accessSwitch-MIB › accessSwitchMaintenance
accessSwitchMaintenance
Module: ZYXEL-accessSwitch-MIB
OID (symbolic): ZYXEL-accessSwitch-MIB::accessSwitchMaintenance
OID (numeric): 1.3.6.1.4.1.890.1.5.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: config save BIT 2: reset BIT 3: local loopback test BIT 4: remote loopback test
What is accessSwitchMaintenance?
This read-write INTEGER is a bitmask control for triggering system maintenance operations: bit 1 saves configuration, bit 2 resets the device, bit 3 runs a local loopback test, and bit 4 runs a remote loopback test, per the DESCRIPTION's instruction that an EMS sets the corresponding bit to 1 to trigger that operation. An admin (or an EMS) writes the appropriate bit here to remotely save config, reset the switch, or run a diagnostic loopback test. Setting bit 2 in accessSwitchMaintenance triggers a device reset without the admin needing physical or console access.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.5.1.1.7 snmpwalk -v2c -c public <target> ZYXEL-accessSwitch-MIB::accessSwitchMaintenance
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.5.1.1.7.1 snmpget -v2c -c public <target> ZYXEL-accessSwitch-MIB::accessSwitchMaintenance.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.5.1.1.7.1 i <value>
Start monitoring ZyXEL access switch (port/subscriber-line operational status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-accessSwitch-MIB::accessSwitchMaintenance OID value, configure state conditions and alerts, and monitor any ZyXEL access switch (port/subscriber-line operational status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | NWA1100 |
| 1.3.6.1.4.1.890.1 | nwaSeries | NWA1100 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.5 | accessSwitch | ZYXEL-accessSwitch-MIB |
| 1.3.6.1.4.1.890.1.5.1 | accessSwitchCommon | ZYXEL-accessSwitch-MIB |
| 1.3.6.1.4.1.890.1.5.1.1 | accessSwitchMgnt | ZYXEL-accessSwitch-MIB |
| 1.3.6.1.4.1.890.1.5.1.1.7 | accessSwitchMaintenance | ZYXEL-accessSwitch-MIB |