All MIBs › ZYXEL-accessSwitch-MIB › accessSwitchDSLConfTarget
accessSwitchDSLConfTarget
Module: ZYXEL-accessSwitch-MIB
OID (symbolic): ZYXEL-accessSwitch-MIB::accessSwitchDSLConfTarget
OID (numeric): 1.3.6.1.4.1.890.1.5.1.1.17
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1~4: reserved Byte 5~7: each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. Byte 8~10: reserved
What is accessSwitchDSLConfTarget?
This read-write OCTET STRING selects which ports a batch DSL configuration operation applies to, encoded per the DESCRIPTION with bytes 5-7 each representing a bitmask of eight ports (byte 5 for ports 1-8, and so on) and bytes 1-4 and 8-10 reserved. An admin constructs this bitmask to target a specific set of DSL ports for a batch enable/disable/mode/profile operation in one SNMP-SET. Setting the appropriate bit in byte 5 of accessSwitchDSLConfTarget targets port 1 for the operation requested in accessSwitchDSLConfOps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.5.1.1.17 snmpwalk -v2c -c public <target> ZYXEL-accessSwitch-MIB::accessSwitchDSLConfTarget
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.5.1.1.17.1 snmpget -v2c -c public <target> ZYXEL-accessSwitch-MIB::accessSwitchDSLConfTarget.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.5.1.1.17.1 s <value>
Start monitoring ZyXEL access switch (port/subscriber-line operational status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-accessSwitch-MIB::accessSwitchDSLConfTarget OID value, configure state conditions and alerts, and monitor any ZyXEL access switch (port/subscriber-line operational status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | NWA1100 |
| 1.3.6.1.4.1.890.1 | nwaSeries | NWA1100 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.5 | accessSwitch | ZYXEL-accessSwitch-MIB |
| 1.3.6.1.4.1.890.1.5.1 | accessSwitchCommon | ZYXEL-accessSwitch-MIB |
| 1.3.6.1.4.1.890.1.5.1.1 | accessSwitchMgnt | ZYXEL-accessSwitch-MIB |
| 1.3.6.1.4.1.890.1.5.1.1.17 | accessSwitchDSLConfTarget | ZYXEL-accessSwitch-MIB |