All MIBs › ZYXEL-accessSwitch-MIB › accessSwitchDSLConfOps
accessSwitchDSLConfOps
Module: ZYXEL-accessSwitch-MIB
OID (symbolic): ZYXEL-accessSwitch-MIB::accessSwitchDSLConfOps
OID (numeric): 1.3.6.1.4.1.890.1.5.1.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port BIT 3: set DSL mode BIT 4: set profile
What is accessSwitchDSLConfOps?
This read-write INTEGER is a bitmask control for batch DSL-line provisioning: bit 1 enables the port, bit 2 disables it, bit 3 sets DSL mode, and bit 4 sets the profile, per the DESCRIPTION's instruction that an EMS sets the corresponding bit to 1 to request that operation. An admin (or EMS) writes this alongside accessSwitchDSLConfTarget, accessSwitchDSLConfMode, or accessSwitchDSLConfProfileName to batch-configure DSL ports without touching each one individually. Setting bit 3 in accessSwitchDSLConfOps applies the DSL mode configured in accessSwitchDSLConfMode to the ports selected in accessSwitchDSLConfTarget.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.5.1.1.16 snmpwalk -v2c -c public <target> ZYXEL-accessSwitch-MIB::accessSwitchDSLConfOps
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.5.1.1.16.1 snmpget -v2c -c public <target> ZYXEL-accessSwitch-MIB::accessSwitchDSLConfOps.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.5.1.1.16.1 i <value>
Start monitoring ZyXEL access switch (port/subscriber-line operational status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-accessSwitch-MIB::accessSwitchDSLConfOps OID value, configure state conditions and alerts, and monitor any ZyXEL access switch (port/subscriber-line operational status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | NWA1100 |
| 1.3.6.1.4.1.890.1 | nwaSeries | NWA1100 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.5 | accessSwitch | ZYXEL-accessSwitch-MIB |
| 1.3.6.1.4.1.890.1.5.1 | accessSwitchCommon | ZYXEL-accessSwitch-MIB |
| 1.3.6.1.4.1.890.1.5.1.1 | accessSwitchMgnt | ZYXEL-accessSwitch-MIB |
| 1.3.6.1.4.1.890.1.5.1.1.16 | accessSwitchDSLConfOps | ZYXEL-accessSwitch-MIB |