All MIBs › ZXR10-SWITCH-ACL-MIB-59 › zxr10LinkACLNo
zxr10LinkACLNo
Module: ZXR10-SWITCH-ACL-MIB-59
OID (symbolic): ZXR10-SWITCH-ACL-MIB-59::zxr10LinkACLNo
OID (numeric): 1.3.6.1.4.1.3902.3.102.2.3.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Link ACL number <200-299> Configure link ACL number
What is zxr10LinkACLNo?
Identifies which link (Layer 2) ACL this rule belongs to; link ACLs use numbers 200-299.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.2.3.1.1 snmpwalk -v2c -c public <target> ZXR10-SWITCH-ACL-MIB-59::zxr10LinkACLNo
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.2.3.1.1.1 snmpget -v2c -c public <target> ZXR10-SWITCH-ACL-MIB-59::zxr10LinkACLNo.1
Start monitoring ZTE ZXR10 5900-series switch (ACL rule-definition/match-condition config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-SWITCH-ACL-MIB-59::zxr10LinkACLNo OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 5900-series switch (ACL rule-definition/match-condition config status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.102 | zxr10switch | Vct-Loopdetect-59-MIB |
| 1.3.6.1.4.1.3902.3.102.2 | zxr10ACL | ZXR10-SWITCH-ACL-MIB |
| 1.3.6.1.4.1.3902.3.102.2.3 | zxr10LinkACLTable | ZXR10-SWITCH-ACL-MIB |
| 1.3.6.1.4.1.3902.3.102.2.3.1 | zxr10LinkACLEntry | ZXR10-SWITCH-ACL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.102.2.3.1.1 | zxr10LinkACLNo | ZXR10-SWITCH-ACL-MIB-59 |