All MIBs › ZXR10-SNMP-MIB › zxr10SnmpSetCmdErrCode

zxr10SnmpSetCmdErrCode

OID (symbolic): ZXR10-SNMP-MIB::zxr10SnmpSetCmdErrCode

OID (numeric): 1.3.6.1.4.1.3902.3.6000.101.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: Error code for Snmp set command. When agent executes an Snmp set, this variable should be maintained. Value 0 means no error.

What is zxr10SnmpSetCmdErrCode?

Holds the error code from the most recent SNMP SET command the agent executed; a value of 0 means the last set succeeded, so an admin scripting SNMP writes can poll this to confirm a configuration change actually took effect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.101.1
snmpwalk -v2c -c public <target> ZXR10-SNMP-MIB::zxr10SnmpSetCmdErrCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.101.1.1
snmpget -v2c -c public <target> ZXR10-SNMP-MIB::zxr10SnmpSetCmdErrCode.1

Start monitoring ZTE ZXR10 router/switch (SNMP agent community/access-control config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-SNMP-MIB::zxr10SnmpSetCmdErrCode OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 router/switch (SNMP agent community/access-control config status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.3902	zte	DPI-MIB
1.3.6.1.4.1.3902.3	zxr10	FANS-POWER-MIB
1.3.6.1.4.1.3902.3.6000	zxr10RosngMIB	MR-MIB
1.3.6.1.4.1.3902.3.6000.101	zxr10SnmpGlobalObjects	ZXR10-SNMP-ERR-CODE-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.3902.3.6000.101.1	zxr10SnmpSetCmdErrCode	ZXR10-SNMP-MIB

ZXR10-SNMP-MIB :: zxr10SnmpSetCmdErrCode

zxr10SnmpSetCmdErrCode

Also defined in

Module

This MIB depends on