ZXR10-NTP-MIB :: zxr10ntpSrcInterface

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsZXR10-NTP-MIBzxr10ntpSrcInterface

zxr10ntpSrcInterface

Module: ZXR10-NTP-MIB

OID (symbolic): ZXR10-NTP-MIB::zxr10ntpSrcInterface

OID (numeric): 1.3.6.1.4.1.3902.3.110.13.10

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: The NTP source interface.The L2 interface does not support. Source IP and source interface can't be configured together

What is zxr10ntpSrcInterface?

The interface whose address the device uses as the source for outgoing NTP packets; not supported on Layer 2 interfaces, and can't be configured together with a source IP address.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.110.13.10
snmpwalk -v2c -c public <target> ZXR10-NTP-MIB::zxr10ntpSrcInterface

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.110.13.10.1
snmpget -v2c -c public <target> ZXR10-NTP-MIB::zxr10ntpSrcInterface.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.110.13.10.1 s <value>

Start monitoring ZTE ZXR10 carrier routers/switches (NTP sync-status/active-server/config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-NTP-MIB::zxr10ntpSrcInterface OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 carrier routers/switches (NTP sync-status/active-server/config status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteUAS-MIB
1.3.6.1.4.1.3902.3zxr10ZXR10-BFD-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3902.3.110zxr10ntpZXR10-NTP-MIB
1.3.6.1.4.1.3902.3.110.13zxr10ntpConfigZXR10-NTP-MIB
1.3.6.1.4.1.3902.3.110.13.10zxr10ntpSrcInterfaceZXR10-NTP-MIB