All MIBs › ZXR10-NTP-MIB › zxr10ntpSrcIPv6Address
zxr10ntpSrcIPv6Address
Module: ZXR10-NTP-MIB
OID (symbolic): ZXR10-NTP-MIB::zxr10ntpSrcIPv6Address
OID (numeric): 1.3.6.1.4.1.3902.3.110.13.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The NTP IPv6 source address.Source IP and source interface can't be configured together
What is zxr10ntpSrcIPv6Address?
The IPv6 address the device uses as the source address in outgoing NTP packets; like its IPv4 counterpart, it can't be configured together with a source interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.110.13.5 snmpwalk -v2c -c public <target> ZXR10-NTP-MIB::zxr10ntpSrcIPv6Address
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.110.13.5.1 snmpget -v2c -c public <target> ZXR10-NTP-MIB::zxr10ntpSrcIPv6Address.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.110.13.5.1 s <value>
Start monitoring ZTE ZXR10 carrier routers/switches (NTP sync-status/active-server/config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-NTP-MIB::zxr10ntpSrcIPv6Address OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 carrier routers/switches (NTP sync-status/active-server/config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | UAS-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | ZXR10-BFD-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.110 | zxr10ntp | ZXR10-NTP-MIB |
| 1.3.6.1.4.1.3902.3.110.13 | zxr10ntpConfig | ZXR10-NTP-MIB |
| 1.3.6.1.4.1.3902.3.110.13.5 | zxr10ntpSrcIPv6Address | ZXR10-NTP-MIB |