All MIBs › ZTE-AN-SOFTWARE-MIB › zxAnSwAutoUpdateChkEnable
zxAnSwAutoUpdateChkEnable
Module: ZTE-AN-SOFTWARE-MIB
OID (symbolic): ZTE-AN-SOFTWARE-MIB::zxAnSwAutoUpdateChkEnable
OID (numeric): 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable or disable the software periodic check function.
The multi-variables binding rule should be complied with when a software periodic check. According to this rule, all the related mib variables must be included in one SNMP set operation.
There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone.
To configure software periodic check(except disable software periodic check function), the mandatory and optional variables are as follows: mandatoty: zxAnSwAutoUpdateChkEnable, zxAnSwAutoUpdateChkStartTime, zxAnSwAutoUpdateChkInterval optional : none
What is zxAnSwAutoUpdateChkEnable?
This enables or disables periodic automatic checking for software version differences against a file server; enabling it (other than to disable the feature) requires also setting the check start time and interval in the same SNMP operation, per the module's multi-variable binding rule.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.1 snmpwalk -v2c -c public <target> ZTE-AN-SOFTWARE-MIB::zxAnSwAutoUpdateChkEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.1.1 snmpget -v2c -c public <target> ZTE-AN-SOFTWARE-MIB::zxAnSwAutoUpdateChkEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.1.1 i <value>
Start monitoring ZTE Access Node (DSLAM/OLT-class access equipment) (firmware-image inventory/upgrade-progress status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-SOFTWARE-MIB::zxAnSwAutoUpdateChkEnable OID value, configure state conditions and alerts, and monitor any ZTE Access Node (DSLAM/OLT-class access equipment) (firmware-image inventory/upgrade-progress status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.20 | zxAnSystem | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.20.30 | zxAnSoftwareMib | ZTE-AN-SOFTWARE-MIB |
| 1.3.6.1.4.1.3902.1082.20.30.2 | zxAnSwObjects | ZTE-AN-SOFTWARE-MIB |
| 1.3.6.1.4.1.3902.1082.20.30.2.3 | zxAnSwUpdateObjects | ZTE-AN-SOFTWARE-MIB |
| 1.3.6.1.4.1.3902.1082.20.30.2.3.3 | zxAnSwAutoUpdateObjects | ZTE-AN-SOFTWARE-MIB |
| 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1 | zxAnSwAutoUpdateGlobalObjects | ZTE-AN-SOFTWARE-MIB |
| 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1 | zxAnSwAutoUpdateChkObjects | ZTE-AN-SOFTWARE-MIB |
| 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.1 | zxAnSwAutoUpdateChkEnable | ZTE-AN-SOFTWARE-MIB |