All MIBs › ZTE-AN-SECURITY-PACKET-FILTER-MIB › zxAnSecL2cpFiltDefaultMacMask
zxAnSecL2cpFiltDefaultMacMask
Module: ZTE-AN-SECURITY-PACKET-FILTER-MIB
OID (symbolic): ZTE-AN-SECURITY-PACKET-FILTER-MIB::zxAnSecL2cpFiltDefaultMacMask
OID (numeric): 1.3.6.1.4.1.3902.1082.70.35.2.2.3.1.3
Node type: OBJECT-TYPE
Type: MacAddress
Access: read-only
Description: This is the wildcard mask for the zxAnSecL2cpFiltDefaultDestMac bits that must match. 1 bits in the mask indicate the corresponding bits in the zxAnSecL2cpFiltDefaultDestMac must match in order for the matching to be successful, and 0 bits are don't care bits in the matching. A value of zero causes only packets of source address the same as zxAnSecL2cpFiltDefaultDestMac to match.
What is zxAnSecL2cpFiltDefaultMacMask?
This read-only MacAddress is the wildcard mask applied to zxAnSecL2cpFiltDefaultDestMac, where 1 bits require an exact match and 0 bits are don't-care, defaulting to all-1s (FF:FF:FF:FF:FF:FF) for an exact match, with a zero mask matching any address the same as the configured default destination MAC. An admin can read this to understand how strictly the default filter's destination MAC address is being matched against incoming L2CP frames. For example, seeing the default all-1s mask confirms the default filter only matches frames sent to that exact destination MAC.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.35.2.2.3.1.3 snmpwalk -v2c -c public <target> ZTE-AN-SECURITY-PACKET-FILTER-MIB::zxAnSecL2cpFiltDefaultMacMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.35.2.2.3.1.3.1 snmpget -v2c -c public <target> ZTE-AN-SECURITY-PACKET-FILTER-MIB::zxAnSecL2cpFiltDefaultMacMask.1
Start monitoring ZTE Access Node (AN) broadband access/DSLAM platforms (ACL-style packet-filter rule config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-SECURITY-PACKET-FILTER-MIB::zxAnSecL2cpFiltDefaultMacMask OID value, configure state conditions and alerts, and monitor any ZTE Access Node (AN) broadband access/DSLAM platforms (ACL-style packet-filter rule config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.35 | zxAnSecurityPacketFilterMib | ZTE-AN-SECURITY-PACKET-FILTER-MIB |
| 1.3.6.1.4.1.3902.1082.70.35.2 | zxAnSecPacketFilterObjects | ZTE-AN-SECURITY-PACKET-FILTER-MIB |
| 1.3.6.1.4.1.3902.1082.70.35.2.2 | zxAnSecL2cpFiltObjects | ZTE-AN-SECURITY-PACKET-FILTER-MIB |
| 1.3.6.1.4.1.3902.1082.70.35.2.2.3 | zxAnSecL2cpFiltDefaultTable | ZTE-AN-SECURITY-PACKET-FILTER-MIB |
| 1.3.6.1.4.1.3902.1082.70.35.2.2.3.1 | zxAnSecL2cpFiltDefaultEntry | ZTE-AN-SECURITY-PACKET-FILTER-MIB |
| 1.3.6.1.4.1.3902.1082.70.35.2.2.3.1.3 | zxAnSecL2cpFiltDefaultMacMask | ZTE-AN-SECURITY-PACKET-FILTER-MIB |