All MIBs › ZTE-AN-SECURITY-ISOLATION-MIB › zxAnSecUplinkIsolateEnable
zxAnSecUplinkIsolateEnable
Module: ZTE-AN-SECURITY-ISOLATION-MIB
OID (symbolic): ZTE-AN-SECURITY-ISOLATION-MIB::zxAnSecUplinkIsolateEnable
OID (numeric): 1.3.6.1.4.1.3902.1082.70.30.2.4.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable/disable the uplink port isolation. enabled(1): The port is added to the isolation group. All the ports in the isolation group are isolated from each other in layer 2, but they are not isolated from the ports not in the isolation group. disabled(2): The port is removed from the isolation group.
What is zxAnSecUplinkIsolateEnable?
This read-write flag adds or removes a port from the uplink isolation group, where enabled(1) places the port in a group whose members are isolated from each other in layer 2 but not from ports outside the group. An administrator uses it to prevent lateral traffic between uplink ports while still allowing each to reach the rest of the network normally. Its default is disabled(2), meaning ports must be explicitly opted into the isolation group.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.30.2.4.2.1.1 snmpwalk -v2c -c public <target> ZTE-AN-SECURITY-ISOLATION-MIB::zxAnSecUplinkIsolateEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.30.2.4.2.1.1.1 snmpget -v2c -c public <target> ZTE-AN-SECURITY-ISOLATION-MIB::zxAnSecUplinkIsolateEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.70.30.2.4.2.1.1.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port traffic-isolation-group config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-SECURITY-ISOLATION-MIB::zxAnSecUplinkIsolateEnable OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port traffic-isolation-group config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.30 | zxAnSecurityIsolationMib | ZTE-AN-SECURITY-ISOLATION-MIB |
| 1.3.6.1.4.1.3902.1082.70.30.2 | zxAnSecIsolationObjects | ZTE-AN-SECURITY-ISOLATION-MIB |
| 1.3.6.1.4.1.3902.1082.70.30.2.4 | zxAnSecUplinkIsolationObjects | ZTE-AN-SECURITY-ISOLATION-MIB |
| 1.3.6.1.4.1.3902.1082.70.30.2.4.2 | zxAnSecUplinkIsolationTable | ZTE-AN-SECURITY-ISOLATION-MIB |
| 1.3.6.1.4.1.3902.1082.70.30.2.4.2.1 | zxAnSecUplinkIsolationEntry | ZTE-AN-SECURITY-ISOLATION-MIB |
| 1.3.6.1.4.1.3902.1082.70.30.2.4.2.1.1 | zxAnSecUplinkIsolateEnable | ZTE-AN-SECURITY-ISOLATION-MIB |