All MIBs › ZTE-AN-SECURITY-ISOLATION-MIB › zxAnSecGlbVlanIsolationEnable
zxAnSecGlbVlanIsolationEnable
Module: ZTE-AN-SECURITY-ISOLATION-MIB
OID (symbolic): ZTE-AN-SECURITY-ISOLATION-MIB::zxAnSecGlbVlanIsolationEnable
OID (numeric): 1.3.6.1.4.1.3902.1082.70.30.2.3.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable/disalbe the global VLAN isolation.
What is zxAnSecGlbVlanIsolationEnable?
This read-write flag globally enables or disables VLAN isolation, gating whether the VLAN communication table (zxAnSecVlanCommunicateTable) can even be populated. An administrator must enable it before creating any explicit inter-VLAN communication exceptions, since the MIB states rows in that table can only be created or deleted while this flag is enabled. Disabling it after configuring exceptions blocks further changes to those exception rows without necessarily removing existing isolation behavior.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.30.2.3.1.1 snmpwalk -v2c -c public <target> ZTE-AN-SECURITY-ISOLATION-MIB::zxAnSecGlbVlanIsolationEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.30.2.3.1.1.1 snmpget -v2c -c public <target> ZTE-AN-SECURITY-ISOLATION-MIB::zxAnSecGlbVlanIsolationEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.70.30.2.3.1.1.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port traffic-isolation-group config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-SECURITY-ISOLATION-MIB::zxAnSecGlbVlanIsolationEnable OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port traffic-isolation-group config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.30 | zxAnSecurityIsolationMib | ZTE-AN-SECURITY-ISOLATION-MIB |
| 1.3.6.1.4.1.3902.1082.70.30.2 | zxAnSecIsolationObjects | ZTE-AN-SECURITY-ISOLATION-MIB |
| 1.3.6.1.4.1.3902.1082.70.30.2.3 | zxAnSecVlanIsolationObjects | ZTE-AN-SECURITY-ISOLATION-MIB |
| 1.3.6.1.4.1.3902.1082.70.30.2.3.1 | zxAnSecVlanIsolationGlbObjects | ZTE-AN-SECURITY-ISOLATION-MIB |
| 1.3.6.1.4.1.3902.1082.70.30.2.3.1.1 | zxAnSecGlbVlanIsolationEnable | ZTE-AN-SECURITY-ISOLATION-MIB |