All MIBs › ZTE-AN-LOOPBACKDETECT-MIB › zxAnLoopbackManualDetectIfVid
zxAnLoopbackManualDetectIfVid
Module: ZTE-AN-LOOPBACKDETECT-MIB
OID (symbolic): ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackManualDetectIfVid
OID (numeric): 1.3.6.1.4.1.3902.1082.80.20.2.4.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The VLAN ID of the interface manual loopback detection. A value of '65535' means that the VLAN ID is not configured.
What is zxAnLoopbackManualDetectIfVid?
This object sets the VLAN ID used for a manual, on-demand loopback detection test on this interface, with 65535 (the default) meaning no VLAN is configured; the table notes these parameters cannot be read back once the detection has started. Administrators set this before triggering zxAnLoopbackManualDetectIfAction to target the specific VLAN they suspect is looping. Setting it to 30 scopes the manual detection test to VLAN 30 on this port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.4.1.2 snmpwalk -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackManualDetectIfVid
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.4.1.2.1 snmpget -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackManualDetectIfVid.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.80.20.2.4.1.2.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackManualDetectIfVid OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.80 | zxAnOam | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.80.20 | zxAnLoopbackDetectMib | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2 | zxAnLoopbackDetectObjects | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.4 | zxAnLoopbackManualDetectIfTable | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.4.1 | zxAnLoopbackManualDetectIfEntry | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.4.1.2 | zxAnLoopbackManualDetectIfVid | ZTE-AN-LOOPBACKDETECT-MIB |