All MIBs › ZTE-AN-LOOPBACKDETECT-MIB › zxAnLoopbackManualDetectIfAction
zxAnLoopbackManualDetectIfAction
Module: ZTE-AN-LOOPBACKDETECT-MIB
OID (symbolic): ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackManualDetectIfAction
OID (numeric): 1.3.6.1.4.1.3902.1082.80.20.2.4.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The interface manual loopback detection action.
What is zxAnLoopbackManualDetectIfAction?
This object triggers a one-time, on-demand loopback detection test on this interface; the only defined value is start(1), which kicks off the manual check. Administrators write start(1) to this object when they want to immediately verify whether a specific port is looped, rather than waiting for the periodic automatic detection cycle. After writing start(1), the switch runs the manual detection using the VLAN and packet-count parameters configured in the same table row.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.4.1.1 snmpwalk -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackManualDetectIfAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.4.1.1.1 snmpget -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackManualDetectIfAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.80.20.2.4.1.1.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackManualDetectIfAction OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.80 | zxAnOam | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.80.20 | zxAnLoopbackDetectMib | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2 | zxAnLoopbackDetectObjects | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.4 | zxAnLoopbackManualDetectIfTable | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.4.1 | zxAnLoopbackManualDetectIfEntry | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.4.1.1 | zxAnLoopbackManualDetectIfAction | ZTE-AN-LOOPBACKDETECT-MIB |