All MIBs › ZTE-AN-LOOPBACKDETECT-MIB › zxAnLoopbackDetectRechkInterval
zxAnLoopbackDetectRechkInterval
Module: ZTE-AN-LOOPBACKDETECT-MIB
OID (symbolic): ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectRechkInterval
OID (numeric): 1.3.6.1.4.1.3902.1082.80.20.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: If a interface is loopbackd, the systerm will start the rechecking mechanism. This object indicates the recheck interval.
What is zxAnLoopbackDetectRechkInterval?
This object sets, in seconds, how often the switch rechecks a port that has already been flagged as loopbacked, within a 1-3600 second range and a default of 10. Administrators tune this interval to control how quickly the switch notices when a loop has cleared versus how much rechecking overhead it generates. A shorter interval like 5 seconds detects loop recovery faster at the cost of more frequent detection packets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.1.3 snmpwalk -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectRechkInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.1.3.1 snmpget -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectRechkInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.80.20.1.3.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectRechkInterval OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.80 | zxAnOam | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.80.20 | zxAnLoopbackDetectMib | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.1 | zxAnLoopbackDetectGlobalObjects | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.1.3 | zxAnLoopbackDetectRechkInterval | ZTE-AN-LOOPBACKDETECT-MIB |