All MIBs › ZTE-AN-LOOPBACKDETECT-MIB › zxAnLoopbackDetectIfStartVid
zxAnLoopbackDetectIfStartVid
Module: ZTE-AN-LOOPBACKDETECT-MIB
OID (symbolic): ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfStartVid
OID (numeric): 1.3.6.1.4.1.3902.1082.80.20.2.2.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The starting VLAN ID of the active loopback detection. A value of '65535' means that the starting VLAN ID is not configured.
What is zxAnLoopbackDetectIfStartVid?
This object sets the starting VLAN ID for the range of VLANs that active loopback detection probes on this interface, with 65535 (the default) meaning no starting VLAN is configured. Administrators set this together with zxAnLoopbackDetectIfEndVid to scope detection to the VLANs actually carried on a trunk port. Setting it to 10 begins the detected VLAN range at VLAN 10 on this interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.3 snmpwalk -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfStartVid
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.3.1 snmpget -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfStartVid.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.3.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfStartVid OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.80 | zxAnOam | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.80.20 | zxAnLoopbackDetectMib | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2 | zxAnLoopbackDetectObjects | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2 | zxAnLoopbackDetectIfConfTable | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1 | zxAnLoopbackDetectIfConfEntry | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1.3 | zxAnLoopbackDetectIfStartVid | ZTE-AN-LOOPBACKDETECT-MIB |