All MIBs › ZTE-AN-LOOPBACKDETECT-MIB › zxAnLoopbackDetectIfShutdown
zxAnLoopbackDetectIfShutdown
Module: ZTE-AN-LOOPBACKDETECT-MIB
OID (symbolic): ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfShutdown
OID (numeric): 1.3.6.1.4.1.3902.1082.80.20.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicate whether shutdown the upstream flow of the interface which is loopbackd. enabled(1) means shutdown. disabled(2) means not shutdown.
What is zxAnLoopbackDetectIfShutdown?
This object controls whether the switch shuts down the upstream traffic flow on a port once loopback detection identifies it as looped, with enabled(1) shutting it down and disabled(2), the default, leaving it up. Administrators enable this to automatically stop a loop from flooding the network the moment it's detected, rather than just logging an alarm. With the default disabled(2), a looped port stays forwarding traffic even after the loop is detected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.1.2 snmpwalk -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfShutdown
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.1.2.1 snmpget -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfShutdown.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.80.20.1.2.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfShutdown OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.80 | zxAnOam | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.80.20 | zxAnLoopbackDetectMib | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.1 | zxAnLoopbackDetectGlobalObjects | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.1.2 | zxAnLoopbackDetectIfShutdown | ZTE-AN-LOOPBACKDETECT-MIB |