All MIBs › ZTE-AN-LOOPBACKDETECT-MIB › zxAnLoopbackDetectIfEndVid
zxAnLoopbackDetectIfEndVid
Module: ZTE-AN-LOOPBACKDETECT-MIB
OID (symbolic): ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfEndVid
OID (numeric): 1.3.6.1.4.1.3902.1082.80.20.2.2.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The ending VLAN ID of the active loopback detection. A value of '65535' means that the ending VLAN ID is not configured. zxAnLoopbackDetectIfEndVid must be greater than or equal to zxAnLoopbackDetectIfStartVid. Only one VLAN ID is configured When zxAnLoopbackDetectIfEndVid is equal to zxAnLoopbackDetectIfStartVid.
What is zxAnLoopbackDetectIfEndVid?
This object sets the ending VLAN ID for the range of VLANs that active loopback detection probes on this interface, and it must be greater than or equal to zxAnLoopbackDetectIfStartVid; setting both to the same value scopes detection to a single VLAN. Administrators pair this with the start VID to limit active probing to only the VLANs relevant on a given trunk. Setting it equal to zxAnLoopbackDetectIfStartVid at 10 confines detection to VLAN 10 alone on this interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.4 snmpwalk -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfEndVid
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.4.1 snmpget -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfEndVid.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.4.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfEndVid OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.80 | zxAnOam | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.80.20 | zxAnLoopbackDetectMib | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2 | zxAnLoopbackDetectObjects | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2 | zxAnLoopbackDetectIfConfTable | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1 | zxAnLoopbackDetectIfConfEntry | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1.4 | zxAnLoopbackDetectIfEndVid | ZTE-AN-LOOPBACKDETECT-MIB |