All MIBs › ZTE-AN-LOOPBACKDETECT-MIB › zxAnLoopbackDetectIfConfMode
zxAnLoopbackDetectIfConfMode
Module: ZTE-AN-LOOPBACKDETECT-MIB
OID (symbolic): ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfConfMode
OID (numeric): 1.3.6.1.4.1.3902.1082.80.20.2.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The configured loopback detection mode. autoDetection means the loopback detection VLAN ID is specified by the VLAN translation configuration in user-side and the VLAN member list in network-side. userSpecifiedVid means the loopback detection VLAN ID is specified by the zxAnLoopbackDetectIfStartVid and zxAnLoopbackDetectIfEndVid. It is only defined for C600 series.
What is zxAnLoopbackDetectIfConfMode?
This object selects how the interface determines which VLAN ID to use for loopback detection: autoDetection(1), the default, derives it from the port's VLAN translation and network-side VLAN membership configuration, while userSpecifiedVid(2) uses the explicit zxAnLoopbackDetectIfStartVid and IfEndVid range instead; this mode is only defined for C600 series. Administrators switch to userSpecifiedVid when the auto-derived VLAN doesn't match the VLAN they actually want probed. Choosing userSpecifiedVid(2) and then setting explicit start and end VIDs gives an admin precise control over which VLAN is used for detection on this port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.5 snmpwalk -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfConfMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.5.1 snmpget -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfConfMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.5.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfConfMode OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.80 | zxAnOam | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.80.20 | zxAnLoopbackDetectMib | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2 | zxAnLoopbackDetectObjects | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2 | zxAnLoopbackDetectIfConfTable | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1 | zxAnLoopbackDetectIfConfEntry | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1.5 | zxAnLoopbackDetectIfConfMode | ZTE-AN-LOOPBACKDETECT-MIB |