All MIBs › ZTE-AN-LOOPBACKDETECT-MIB › zxAnLoopbackDetectIfActiveEnable
zxAnLoopbackDetectIfActiveEnable
Module: ZTE-AN-LOOPBACKDETECT-MIB
OID (symbolic): ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfActiveEnable
OID (numeric): 1.3.6.1.4.1.3902.1082.80.20.2.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicate the interface switch of the active loopback detection function. enabled(1) means the switch is on, disabled(2) means the switch is off. For C600 series, the default value is enabled. For non-C600 series, the default value is disabled.
What is zxAnLoopbackDetectIfActiveEnable?
This per-interface object turns active loopback detection on or off for a specific port, defaulting to enabled on C600 series and disabled on other platforms. Administrators use it to selectively enable active probing on ports where passive detection alone isn't catching loops quickly enough. Enabling it on an access port used by end-user devices lets the switch proactively probe that port for accidental cable loops.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.2 snmpwalk -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfActiveEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.2.1 snmpget -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfActiveEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.80.20.2.2.1.2.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfActiveEnable OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.80 | zxAnOam | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.80.20 | zxAnLoopbackDetectMib | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2 | zxAnLoopbackDetectObjects | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2 | zxAnLoopbackDetectIfConfTable | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1 | zxAnLoopbackDetectIfConfEntry | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1.2 | zxAnLoopbackDetectIfActiveEnable | ZTE-AN-LOOPBACKDETECT-MIB |