All MIBs › ZTE-AN-LOOPBACKDETECT-MIB › zxAnLoopbackDetectActiveInterval
zxAnLoopbackDetectActiveInterval
Module: ZTE-AN-LOOPBACKDETECT-MIB
OID (symbolic): ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectActiveInterval
OID (numeric): 1.3.6.1.4.1.3902.1082.80.20.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The interval of the active loopback detection. For C600 Series, the default value is 30. For non-C600 Series, the default value is 120.
What is zxAnLoopbackDetectActiveInterval?
This object sets, in seconds, how often the switch sends active loopback-detection probe packets, within a 1-900 second range, defaulting to 30 seconds on C600 series and 120 seconds on other platforms. Administrators lower this interval for faster loop detection on critical links, accepting the added probe traffic. A value of 60 would have the switch send a detection packet on this interface roughly once a minute.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.1.5 snmpwalk -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectActiveInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.80.20.1.5.1 snmpget -v2c -c public <target> ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectActiveInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.80.20.1.5.1 i <value>
Start monitoring ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectActiveInterval OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT/Ethernet access switch) (per-port loop-detected/mitigation-action status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.80 | zxAnOam | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.80.20 | zxAnLoopbackDetectMib | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.1 | zxAnLoopbackDetectGlobalObjects | ZTE-AN-LOOPBACKDETECT-MIB |
| 1.3.6.1.4.1.3902.1082.80.20.1.5 | zxAnLoopbackDetectActiveInterval | ZTE-AN-LOOPBACKDETECT-MIB |