All MIBs › ZTE-AN-INTERFACE-LOOPBACK-MIB › zxAnIfLoopbackUplinkEnable
zxAnIfLoopbackUplinkEnable
Module: ZTE-AN-INTERFACE-LOOPBACK-MIB
OID (symbolic): ZTE-AN-INTERFACE-LOOPBACK-MIB::zxAnIfLoopbackUplinkEnable
OID (numeric): 1.3.6.1.4.1.3902.1082.30.38.2.1.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enables and disables uplink interface loopback.
What is zxAnIfLoopbackUplinkEnable?
This value enables or disables uplink interface loopback on a ZTE access node, using enabled(1) or disabled(2), defaulting to disabled(2) per the source's DEFVAL. A network technician enables this temporarily to loop the uplink interface for cable and signal-path testing. For example, setting zxAnIfLoopbackUplinkEnable to enabled(1) puts the uplink interface into loopback so a technician can verify the physical link is passing signal correctly before re-enabling normal service.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.38.2.1.2.1.1 snmpwalk -v2c -c public <target> ZTE-AN-INTERFACE-LOOPBACK-MIB::zxAnIfLoopbackUplinkEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.38.2.1.2.1.1.1 snmpget -v2c -c public <target> ZTE-AN-INTERFACE-LOOPBACK-MIB::zxAnIfLoopbackUplinkEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.30.38.2.1.2.1.1.1 i <value>
Start monitoring ZTE access nodes with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-INTERFACE-LOOPBACK-MIB::zxAnIfLoopbackUplinkEnable OID value, configure state conditions and alerts, and monitor any ZTE access nodes from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.30 | zxAnInterface | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.30.38 | zxAnInterfaceLoopbackMib | ZTE-AN-INTERFACE-LOOPBACK-MIB |
| 1.3.6.1.4.1.3902.1082.30.38.2 | zxAnIfLoopbackObjects | ZTE-AN-INTERFACE-LOOPBACK-MIB |
| 1.3.6.1.4.1.3902.1082.30.38.2.1 | zxAnIfLoopbackUplinkObjects | ZTE-AN-INTERFACE-LOOPBACK-MIB |
| 1.3.6.1.4.1.3902.1082.30.38.2.1.2 | zxAnIfLoopbackUplinkConfTable | ZTE-AN-INTERFACE-LOOPBACK-MIB |
| 1.3.6.1.4.1.3902.1082.30.38.2.1.2.1 | zxAnIfLoopbackUplinkConfEntry | ZTE-AN-INTERFACE-LOOPBACK-MIB |
| 1.3.6.1.4.1.3902.1082.30.38.2.1.2.1.1 | zxAnIfLoopbackUplinkEnable | ZTE-AN-INTERFACE-LOOPBACK-MIB |