All MIBs › ZTE-AN-INTERFACE-BASE-MIB › zxAnEtherIfConfDuplexSpeed
zxAnEtherIfConfDuplexSpeed
Module: ZTE-AN-INTERFACE-BASE-MIB
OID (symbolic): ZTE-AN-INTERFACE-BASE-MIB::zxAnEtherIfConfDuplexSpeed
OID (numeric): 1.3.6.1.4.1.3902.1082.30.20.2.2.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: DURABLE: { auto_negotiate:all } The desired speed and duplex for this interface. If the selected control is not possible on the interface, a value of illegal(99) is returned. If the port type does NOT support the default of auto_negotiate(1), then the application initializes the port to a valid value (e.g., 1000full(6)). Note that not all controls are possible for all interfaces. For example, only full-1000(6) is available for Gigabit Ethernet interfaces.
What is zxAnEtherIfConfDuplexSpeed?
The desired speed/duplex combination for this Ethernet interface, such as autoNegotiate, full100, or full1000; if the requested combination isn't supported on this port, the device reports illegal(99) instead, and Gigabit ports typically only accept full1000.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.20.2.2.3.1.2 snmpwalk -v2c -c public <target> ZTE-AN-INTERFACE-BASE-MIB::zxAnEtherIfConfDuplexSpeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.20.2.2.3.1.2.1 snmpget -v2c -c public <target> ZTE-AN-INTERFACE-BASE-MIB::zxAnEtherIfConfDuplexSpeed.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.30.20.2.2.3.1.2.1 i <value>
Start monitoring ZTE Access Node (DSLAM/OLT-class) broadband access equipment (shared interface admin/operational-status status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-INTERFACE-BASE-MIB::zxAnEtherIfConfDuplexSpeed OID value, configure state conditions and alerts, and monitor any ZTE Access Node (DSLAM/OLT-class) broadband access equipment (shared interface admin/operational-status status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.30 | zxAnInterface | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.30.20 | zxAnInterfaceBaseMib | ZTE-AN-INTERFACE-BASE-MIB |
| 1.3.6.1.4.1.3902.1082.30.20.2 | zxAnInterfaceObjects | ZTE-AN-INTERFACE-BASE-MIB |
| 1.3.6.1.4.1.3902.1082.30.20.2.2 | zxAnIfBaseObjects | ZTE-AN-INTERFACE-BASE-MIB |
| 1.3.6.1.4.1.3902.1082.30.20.2.2.3 | zxAnEtherIfTable | ZTE-AN-INTERFACE-BASE-MIB |
| 1.3.6.1.4.1.3902.1082.30.20.2.2.3.1 | zxAnEtherIfEntry | ZTE-AN-INTERFACE-BASE-MIB |
| 1.3.6.1.4.1.3902.1082.30.20.2.2.3.1.2 | zxAnEtherIfConfDuplexSpeed | ZTE-AN-INTERFACE-BASE-MIB |