All MIBs › ZTE-AN-EPON-SERVICE-MIB › dot3MpcpRemoteMACAddress
dot3MpcpRemoteMACAddress
Module: ZTE-AN-EPON-SERVICE-MIB
OID (symbolic): ZTE-AN-EPON-SERVICE-MIB::dot3MpcpRemoteMACAddress
OID (numeric): 1.3.6.1.4.1.3902.1082.500.31.2.1.1.6
Node type: OBJECT-TYPE
Type: MacAddress
Access: read-only
Description: An object that identifies the source_address parameter of the last MPCPDUs passed to the MAC Control. This value is updated on reception of a valid frame with (1) a destination Field equal to the reserved multicast address for MAC Control specified in [802.3] Annex 31A, (2) lengthOrType field value equal to the reserved Type for MAC Control as specified in [802.3] Annex 31A. (3) an MPCP subtype value equal to the subtype reserved for MPCP as specified in [802.3ah] Annex 31A. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for each virtual interface. The value reflects the MAC address of the remote entity and therefore the OLT holds a value for each LLID which is the MAC address of the ONU and the ONU has a single value which is the OLT MAC address.
What is dot3MpcpRemoteMACAddress?
This read-only value reports the source MAC address from the most recent valid MPCP control frame received on this interface, giving the OLT the ONU's MAC address per LLID, and giving an ONU the OLT's MAC address. An admin uses it to positively identify the remote MPCP peer on a given virtual link. For example, checking this value against a known inventory of ONU MAC addresses confirms exactly which physical ONU is registered on a given OLT virtual interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.31.2.1.1.6 snmpwalk -v2c -c public <target> ZTE-AN-EPON-SERVICE-MIB::dot3MpcpRemoteMACAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.31.2.1.1.6.1 snmpget -v2c -c public <target> ZTE-AN-EPON-SERVICE-MIB::dot3MpcpRemoteMACAddress.1
Start monitoring ZTE EPON OLTs/ONUs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-EPON-SERVICE-MIB::dot3MpcpRemoteMACAddress OID value, configure state conditions and alerts, and monitor any ZTE EPON OLTs/ONUs from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.500 | zxAnPon | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.500.31 | dot3Objects | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.2 | dot3MpcpObjects | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.2.1 | dot3MpcpControlTable | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.2.1.1 | dot3MpcpControlEntry | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.2.1.1.6 | dot3MpcpRemoteMACAddress | ZTE-AN-EPON-SERVICE-MIB |