All MIBs › ZTE-AN-EPON-SERVICE-MIB › dot3MpcpOperStatus
dot3MpcpOperStatus
Module: ZTE-AN-EPON-SERVICE-MIB
OID (symbolic): ZTE-AN-EPON-SERVICE-MIB::dot3MpcpOperStatus
OID (numeric): 1.3.6.1.4.1.3902.1082.500.31.2.1.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: This object reflects the operational state of the Multi-Point MAC Control sublayer, as defined in [802.3ah] clause 64. When the value is true(1) the interface will act as if Multi-Point control protocol is enabled. When the value is false(2) the interface will act as if the Multi-Point control protocol is disabled. The operational state can be changed using the MpcpAdminState object.This object is applicable for an OLT,with the same value for all virtual interfaces, and for an ONU.
What is dot3MpcpOperStatus?
This read-only truth value reports whether the Multi-Point MAC Control Protocol (MPCP) sublayer, defined in 802.3ah clause 64, is currently operating as enabled or disabled on this EPON interface. An admin reads it to confirm the actual running state of MPCP, which is controlled via the separate dot3MpcpAdminState object. For example, seeing false(2) here despite the admin state being enabled would prompt the admin to investigate why the protocol failed to actually come up on that interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.31.2.1.1.1 snmpwalk -v2c -c public <target> ZTE-AN-EPON-SERVICE-MIB::dot3MpcpOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.31.2.1.1.1.1 snmpget -v2c -c public <target> ZTE-AN-EPON-SERVICE-MIB::dot3MpcpOperStatus.1
Start monitoring ZTE EPON OLTs/ONUs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-EPON-SERVICE-MIB::dot3MpcpOperStatus OID value, configure state conditions and alerts, and monitor any ZTE EPON OLTs/ONUs from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.500 | zxAnPon | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.500.31 | dot3Objects | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.2 | dot3MpcpObjects | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.2.1 | dot3MpcpControlTable | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.2.1.1 | dot3MpcpControlEntry | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.2.1.1.1 | dot3MpcpOperStatus | ZTE-AN-EPON-SERVICE-MIB |