All MIBs › ZTE-AN-EPON-SERVICE-MIB › dot3EponFecCorrectedBlocks
dot3EponFecCorrectedBlocks
Module: ZTE-AN-EPON-SERVICE-MIB
OID (symbolic): ZTE-AN-EPON-SERVICE-MIB::dot3EponFecCorrectedBlocks
OID (numeric): 1.3.6.1.4.1.3902.1082.500.31.4.1.1.4
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs it is a count of corrected FEC blocks. This counter will not increment for other PHY Types. Increment the counter by one for each received block that is corrected by the FEC function in the PHY. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for each virtual interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime object of the Interface MIB module.
What is dot3EponFecCorrectedBlocks?
This read-only 64-bit counter reports the number of FEC blocks that were successfully corrected by the PHY's forward error correction function on 10PASS-TS, 2BASE-TL, or 1000BASE-PX interfaces, and does not increment when FEC is disabled or unsupported. An admin monitors it to gauge how much the optical link is relying on FEC to maintain error-free operation. For example, a steadily increasing corrected-blocks count, even without service disruption, signals a degrading optical signal that FEC is currently compensating for but that should be addressed proactively.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.31.4.1.1.4 snmpwalk -v2c -c public <target> ZTE-AN-EPON-SERVICE-MIB::dot3EponFecCorrectedBlocks
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.500.31.4.1.1.4.1 snmpget -v2c -c public <target> ZTE-AN-EPON-SERVICE-MIB::dot3EponFecCorrectedBlocks.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dot3EponFecCorrectedBlocks.1
Start monitoring ZTE EPON OLTs/ONUs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-EPON-SERVICE-MIB::dot3EponFecCorrectedBlocks OID value, configure state conditions and alerts, and monitor any ZTE EPON OLTs/ONUs from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.500 | zxAnPon | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.500.31 | dot3Objects | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.4 | dot3EponFecObjects | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.4.1 | dot3EponFecTable | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.4.1.1 | dot3EponFecEntry | ZTE-AN-EPON-SERVICE-MIB |
| 1.3.6.1.4.1.3902.1082.500.31.4.1.1.4 | dot3EponFecCorrectedBlocks | ZTE-AN-EPON-SERVICE-MIB |