All MIBs › ZTE-AN-DHCP-TEST-MIB › zxAnDhcpV4TestIfFailReason
zxAnDhcpV4TestIfFailReason
Module: ZTE-AN-DHCP-TEST-MIB
OID (symbolic): ZTE-AN-DHCP-TEST-MIB::zxAnDhcpV4TestIfFailReason
OID (numeric): 1.3.6.1.4.1.3902.1082.70.41.2.2.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Failed reason for DHCPv4 test.
Possible values are: none(1) - No Error sysResourceAllocationFail(2) - System Resource Allocation Failed packetSendFail(3) - Sending Packet Failed vlanNotFound(4) - VLAN Not Found loopbackEnabled(5) - Loopback Enabled portDisabled(6) - Port Disabled dhcpDiscoverTimeout(7) - DHCP Discover Timeout dhcpRequestTimeout(8) - DHCP Request Timeout dhcpResponseNak(9) - NAK Responded from DHCP Server xidNotMatch(10) - XID Not Match icmpPingTimeout(11) - ICMP Ping Timeout testTimeout(12) - DHCP Test Timeout other(255) - Other
What is zxAnDhcpV4TestIfFailReason?
This enumerated code identifies why the DHCPv4 test on this interface failed. An admin checks it once zxAnDhcpV4TestIfStatus shows failed(4), and it distinguishes failure causes ranging from system resource allocation and packet-send problems to VLAN, loopback, or port-disabled conditions, and DHCP protocol issues like discover/request timeout or a NAK from the server. For example, a ping-timeout reason indicates the client got a lease but then failed to ping the gateway or server within the test window.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.41.2.2.3.1.2 snmpwalk -v2c -c public <target> ZTE-AN-DHCP-TEST-MIB::zxAnDhcpV4TestIfFailReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.41.2.2.3.1.2.1 snmpget -v2c -c public <target> ZTE-AN-DHCP-TEST-MIB::zxAnDhcpV4TestIfFailReason.1
Start monitoring ZTE access node (DSLAM/OLT broadband access platform) (DHCP-lease diagnostic test-result status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-DHCP-TEST-MIB::zxAnDhcpV4TestIfFailReason OID value, configure state conditions and alerts, and monitor any ZTE access node (DSLAM/OLT broadband access platform) (DHCP-lease diagnostic test-result status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.41 | zxAnDhcpTestMib | ZTE-AN-DHCP-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.41.2 | zxAnDhcpTestObjects | ZTE-AN-DHCP-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.41.2.2 | zxAnDhcpV4TestObjects | ZTE-AN-DHCP-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.41.2.2.3 | zxAnDhcpV4TestIfStatusTable | ZTE-AN-DHCP-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.41.2.2.3.1 | zxAnDhcpV4TestIfStatusEntry | ZTE-AN-DHCP-TEST-MIB |
| 1.3.6.1.4.1.3902.1082.70.41.2.2.3.1.2 | zxAnDhcpV4TestIfFailReason | ZTE-AN-DHCP-TEST-MIB |