All MIBs › ZTE-AN-DHCP-L2-RELAY-AGENT-MIB › zxAnDhcpV6L2RAIfWorkMode
zxAnDhcpV6L2RAIfWorkMode
Module: ZTE-AN-DHCP-L2-RELAY-AGENT-MIB
OID (symbolic): ZTE-AN-DHCP-L2-RELAY-AGENT-MIB::zxAnDhcpV6L2RAIfWorkMode
OID (numeric): 1.3.6.1.4.1.3902.1082.70.60.2.2.3.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: DHCPv6 layer 2 relay agent work mode of the interface. LDRA means the protocol RFC6221(Lightweight DHCPv6 Relay Agent). noLdra: The format of the relay messages do not meet RFC6221 standards. ldra: The format of the relay messages meet RFC6221 standards. invalid: The format of the relay message is configured by zxAnDhcpV6L2RAWorkMode.
What is zxAnDhcpV6L2RAIfWorkMode?
This read-write value sets the per-interface DHCPv6 layer-2 relay agent work mode to noLdra(1), ldra(2), or invalid(255), where invalid means the interface instead follows the global zxAnDhcpV6L2RAWorkMode setting, defaulting to invalid. It lets an admin override the RFC 6221 LDRA framing behavior on a single interface independently of the device-wide default. An admin needing LDRA-compliant relay messages on just one uplink interface, while leaving other interfaces on the global default, would set this object to ldra(2) only on that interface's row.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.60.2.2.3.1.4 snmpwalk -v2c -c public <target> ZTE-AN-DHCP-L2-RELAY-AGENT-MIB::zxAnDhcpV6L2RAIfWorkMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.70.60.2.2.3.1.4.1 snmpget -v2c -c public <target> ZTE-AN-DHCP-L2-RELAY-AGENT-MIB::zxAnDhcpV6L2RAIfWorkMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.70.60.2.2.3.1.4.1 i <value>
Start monitoring ZTE access node, DSLAM/OLT-class broadband access equipment (DHCP L2 relay-agent/Option-82 config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-DHCP-L2-RELAY-AGENT-MIB::zxAnDhcpV6L2RAIfWorkMode OID value, configure state conditions and alerts, and monitor any ZTE access node, DSLAM/OLT-class broadband access equipment (DHCP L2 relay-agent/Option-82 config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.70 | zxAnServiceSecurity | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.60 | zxAnDhcpL2RAMib | ZTE-AN-DHCP-L2-RELAY-AGENT-MIB |
| 1.3.6.1.4.1.3902.1082.70.60.2 | zxAnDhcpL2RAObjects | ZTE-AN-DHCP-L2-RELAY-AGENT-MIB |
| 1.3.6.1.4.1.3902.1082.70.60.2.2 | zxAnDhcpV6L2RAObjects | ZTE-AN-DHCP-L2-RELAY-AGENT-MIB |
| 1.3.6.1.4.1.3902.1082.70.60.2.2.3 | zxAnDhcpV6L2RAIfConfTable | ZTE-AN-DHCP-L2-RELAY-AGENT-MIB |
| 1.3.6.1.4.1.3902.1082.70.60.2.2.3.1 | zxAnDhcpV6L2RAIfConfEntry | ZTE-AN-DHCP-L2-RELAY-AGENT-MIB |
| 1.3.6.1.4.1.3902.1082.70.60.2.2.3.1.4 | zxAnDhcpV6L2RAIfWorkMode | ZTE-AN-DHCP-L2-RELAY-AGENT-MIB |