All MIBs › ZTE-AN-CLOCK-MIB › zxAnClockSrcSwitchNewInfo

zxAnClockSrcSwitchNewInfo

OID (symbolic): ZTE-AN-CLOCK-MIB::zxAnClockSrcSwitchNewInfo

OID (numeric): 1.3.6.1.4.1.3902.1082.120.10.1.11

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: the active clock source identify after switch:
    |shelf|     slot  |    port |clockType|
0000  0000   0000 0000 0000 0000 0000 0000
clockType:
       0: internal clock
       2: external clock
       3: E1 clock  not supported this version
       6: synchronous ethernet equipment clock
       7: SDH clock not supported this version
       8: PTP clock not supported this version

What is zxAnClockSrcSwitchNewInfo?

Encodes the shelf, slot, port, and clock type of the clock source that became active after the most recent switchover, using the same encoding as zxAnClockSrcSwitchOldInfo, so an admin can see exactly which source the system switched to.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.120.10.1.11
snmpwalk -v2c -c public <target> ZTE-AN-CLOCK-MIB::zxAnClockSrcSwitchNewInfo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.120.10.1.11.1
snmpget -v2c -c public <target> ZTE-AN-CLOCK-MIB::zxAnClockSrcSwitchNewInfo.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> zxAnClockSrcSwitchNewInfo.1

Start monitoring ZTE Access Node equipment (clock-source-selection/synchronization-state status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-CLOCK-MIB::zxAnClockSrcSwitchNewInfo OID value, configure state conditions and alerts, and monitor any ZTE Access Node equipment (clock-source-selection/synchronization-state status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.3902	zte	DPI-MIB
1.3.6.1.4.1.3902.1082	zxAccessNode	ZTE-AN-SMI
1.3.6.1.4.1.3902.1082.120	zxAnClockSync	ZTE-AN-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.3902.1082.120.10	zxAnClockMib	ZTE-AN-CLOCK-MIB
1.3.6.1.4.1.3902.1082.120.10.1	zxAnClockGlobalObjects	ZTE-AN-CLOCK-MIB
1.3.6.1.4.1.3902.1082.120.10.1.11	zxAnClockSrcSwitchNewInfo	ZTE-AN-CLOCK-MIB

ZTE-AN-CLOCK-MIB :: zxAnClockSrcSwitchNewInfo

zxAnClockSrcSwitchNewInfo

Module

This MIB depends on