ZHONE-RMON-MIB :: hostCreationOrder

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZHONE-RMON-MIB › hostCreationOrder

hostCreationOrder

Module: ZHONE-RMON-MIB

OID (symbolic): ZHONE-RMON-MIB::hostCreationOrder

OID (numeric): 1.3.6.1.4.1.5504.10.1.12.1.4.2.1.2

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: An index that defines the relative ordering of the creation time of hosts captured for a particular hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later.

It is important to note that the order for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTable. By observing this variable, the management station may detect the circumstances where a previous association between a value of hostCreationOrder and a hostEntry may no longer hold.

What is hostCreationOrder?

An index (1 to N) reflecting the order in which this host was discovered relative to other hosts under the same hostControlEntry, with earlier-seen hosts getting lower numbers; admins should watch hostControlLastDeleteTime since deletions can shift these associations.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.10.1.12.1.4.2.1.2
snmpwalk -v2c -c public <target> ZHONE-RMON-MIB::hostCreationOrder

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.10.1.12.1.4.2.1.2.1
snmpget -v2c -c public <target> ZHONE-RMON-MIB::hostCreationOrder.1

Start monitoring Zhone Technologies multiservice access node (RMON traffic-statistics/alarm-threshold status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-RMON-MIB::hostCreationOrder OID value, configure state conditions and alerts, and monitor any Zhone Technologies multiservice access node (RMON traffic-statistics/alarm-threshold status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504ZhoneBITSTORM-HP-160-MIB
1.3.6.1.4.1.5504.10zhoneExperimentalZhone
1.3.6.1.4.1.5504.10.1ietfDraftsZhone
1.3.6.1.4.1.5504.10.1.12zhoneRmonMibModuleZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.10.1.12.1zhoneRmonZHONE-RMON-MIB
1.3.6.1.4.1.5504.10.1.12.1.4hostsZHONE-RMON-MIB
1.3.6.1.4.1.5504.10.1.12.1.4.2hostTableZHONE-RMON-MIB
1.3.6.1.4.1.5504.10.1.12.1.4.2.1hostEntryZHONE-RMON-MIB
1.3.6.1.4.1.5504.10.1.12.1.4.2.1.2hostCreationOrderZHONE-RMON-MIB