All MIBs › ZHONE-RMON-MIB › captureBufferPacketStatus
captureBufferPacketStatus
Module: ZHONE-RMON-MIB
OID (symbolic): ZHONE-RMON-MIB::captureBufferPacketStatus
OID (numeric): 1.3.6.1.4.1.5504.10.1.12.1.8.2.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: A value which indicates the error status of this packet.
The value of this object is defined in the same way as filterPktStatus. The value is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this packet, 2 raised to a value representing E is added to the sum.
The errors defined for a packet captured off of an Ethernet interface are as follows:
bit # Error 0 Packet is longer than 1518 octets 1 Packet is shorter than 64 octets 2 Packet experienced a CRC or Alignment error 3 First packet in this capture buffer after it was detected that some packets were not processed correctly. 4 Packet's order in buffer is only approximate (May only be set for packets sent from the probe)
For example, an Ethernet fragment would have a value of 6 (2^1 + 2^2).
As this MIB is expanded to new media types, this object will have other media-specific errors defined.
What is captureBufferPacketStatus?
A bitmask of error/status conditions detected on this captured packet (e.g. bit 0 = oversized, bit 1 = undersized, bit 2 = CRC/alignment error, bit 3 = first packet after a processing gap, bit 4 = approximate ordering), following the same encoding scheme as filterPktStatus.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.10.1.12.1.8.2.1.7 snmpwalk -v2c -c public <target> ZHONE-RMON-MIB::captureBufferPacketStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.10.1.12.1.8.2.1.7.1 snmpget -v2c -c public <target> ZHONE-RMON-MIB::captureBufferPacketStatus.1
Start monitoring Zhone Technologies multiservice access node (RMON traffic-statistics/alarm-threshold status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-RMON-MIB::captureBufferPacketStatus OID value, configure state conditions and alerts, and monitor any Zhone Technologies multiservice access node (RMON traffic-statistics/alarm-threshold status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.10 | zhoneExperimental | Zhone |
| 1.3.6.1.4.1.5504.10.1 | ietfDrafts | Zhone |
| 1.3.6.1.4.1.5504.10.1.12 | zhoneRmonMibModule | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.10.1.12.1 | zhoneRmon | ZHONE-RMON-MIB |
| 1.3.6.1.4.1.5504.10.1.12.1.8 | capture | ZHONE-RMON-MIB |
| 1.3.6.1.4.1.5504.10.1.12.1.8.2 | captureBufferTable | ZHONE-RMON-MIB |
| 1.3.6.1.4.1.5504.10.1.12.1.8.2.1 | captureBufferEntry | ZHONE-RMON-MIB |
| 1.3.6.1.4.1.5504.10.1.12.1.8.2.1.7 | captureBufferPacketStatus | ZHONE-RMON-MIB |