Description: Current radio alarm status details.  


BIT     Hex     Decimal BIT NAME
Number  Value   Value   
------  ------  ------- ----------------------
0       0x01    1       RSSI_DEVIATION
1       0x02    2       IDU_OOL
2       0x04    4       ODU_TEMP_ALERT
3       0x08    8       RX_BER_ALARM
4       0x10    16      RX_EBNO_ALARM
5       0x20    32      (reserved)
6       0x40    64      (reserved)
7       0x80    128     (reserved)
8       0x100   256     IDU_EQUIP_FAIL
9       0x200   512     ODU_EQUIP_FAIL
10      0x400   1024    IDU_ODU_LINK_FAIL
11      0x800   2048    MC_CHANNEL_FAIL
12      0x1000  4096    (reserved)
13      0x2000  8192    (reserved)
14      0x4000  16384   (reserved)
15      0x8000  32768   SERVICE_AFFECTED

IDU_EQUIP_FAIL - can be caused by:
power supply failure, watchdog timeout, or other internal
failure on indoor unit.

IDU_ODU_LINK_FAIL - can be caused by:
IDU/ODU cable failure, bad connection, or equipment failure

IDU_OOL - can be caused by:
intermittent loss of lock of internal clocks

MC_CHANNEL_FAIL - can be caused by:
Signal path (air) degradation, or internal equipment failure 
on near end or far end node.

ODU_EQUIP_FAIL - can be caused by:
Loss of frequency lock, loss of clock reference, power fault, 
excessive transmitter power, signal path degradation, 
frequency drift, or internal failure of equipment in outdoor
unit.

ODU_TEMP_ALERT - can be caused by:
Operating temperature too high or too low.   Allowable range
of operating temperatures ( in ODU ) are -40C to +65C.

RSSI_DEVIATION - can be caused by:
signal path (air) degradation, excessive heat buildup at ODU,
or frequency drift.

RX_BER_ALARM - can be caused by:
RF noise burst, fade burst, interference, or internal equipment 
failure.

RX_EBNO_ALARM - can be caused by:
Fade, noise burst, or internal equipment stress.

SERVICE_AFFECTED - indicates a predicted loss of data 
or quality of service in transport due to any of the 
above conditions.