ZHONE-PHY-WTN-RADIO-MIB :: wtnAntennaSize

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZHONE-PHY-WTN-RADIO-MIB › wtnAntennaSize

wtnAntennaSize

Module: ZHONE-PHY-WTN-RADIO-MIB

OID (symbolic): ZHONE-PHY-WTN-RADIO-MIB::wtnAntennaSize

OID (numeric): 1.3.6.1.4.1.5504.5.8.1.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Initial power of transmitter is based upon antenna diameter.

oneFoot(1) - a one foot dish
twoFeet(2) - a two foot dish
fourFeet(4) - a four foot dish
sixFeet(6) - a six foot dish

FCC mandates a maximimum EIRP (Effective Isotropic
Radiated Power) level, which is directly dependent
upon antenna size.

The system will use antenna size to determine a 
power level in accordance to maxmimum EIRP.

5.7Ghz family
-------------------
The equipment is shipped with a dish that
is one of 3 sizes:

twoFeet(2) - a two foot dish
fourFeet(4) - a four foot dish
sixFeet(6) - a six foot dish

Default value sixFeet(3).


23Ghz family
-------------------
The equipment is shipped with a dish that
is one of 2 sizes:

oneFoot(1) - a one foot dish
twoFeet(2) - a two foot dish

Default value: twoFeet(2).

What is wtnAntennaSize?

The dish size (one, two, four, or six feet) installed on this radio, used by the system to set an FCC-compliant maximum transmit power (EIRP) based on antenna gain.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.5.8.1.1.11
snmpwalk -v2c -c public <target> ZHONE-PHY-WTN-RADIO-MIB::wtnAntennaSize

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.5.8.1.1.11.1
snmpget -v2c -c public <target> ZHONE-PHY-WTN-RADIO-MIB::wtnAntennaSize.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.5.8.1.1.11.1 i <value>

Start monitoring Zhone Technologies Wireless Terminal Node (WTN) fixed-wireless radio unit (frequency/transmit-power/link-signal status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-PHY-WTN-RADIO-MIB::wtnAntennaSize OID value, configure state conditions and alerts, and monitor any Zhone Technologies Wireless Terminal Node (WTN) fixed-wireless radio unit (frequency/transmit-power/link-signal status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504ZhoneBITSTORM-HP-160-MIB
1.3.6.1.4.1.5504.5zhonePhysicalZhone
1.3.6.1.4.1.5504.5.8zhoneRadioZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.5.8.1wtnConfigTableZHONE-PHY-WTN-RADIO-MIB
1.3.6.1.4.1.5504.5.8.1.1wtnConfigEntryZHONE-PHY-WTN-RADIO-MIB
1.3.6.1.4.1.5504.5.8.1.1.11wtnAntennaSizeZHONE-PHY-WTN-RADIO-MIB