All MIBs › ZHONE-PHY-DS3-MIB › dsx3ConfigExtScrambleEnabled
dsx3ConfigExtScrambleEnabled
Module: ZHONE-PHY-DS3-MIB
OID (symbolic): ZHONE-PHY-DS3-MIB::dsx3ConfigExtScrambleEnabled
OID (numeric): 1.3.6.1.4.1.5504.5.10.2.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This field describes the enabled status of the Ds3 Scramble mode. If this field is true(1) then Scramble mode is enabled, if this field is false(2) scramble mode is disable.
What is dsx3ConfigExtScrambleEnabled?
This object enables or disables payload scrambling on a DS3/E3 physical interface, a technique that randomizes the bit pattern to guarantee sufficient signal transitions for clock recovery on the line. An admin normally leaves this at its default of true, enabled, to match standard DS3 line requirements, and would only disable it to interoperate with specific legacy equipment that does not scramble. For example, turning dsx3ConfigExtScrambleEnabled to false on a link connected to non-scrambling legacy gear would resolve line errors caused by a scrambling mismatch between the two ends.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.5.10.2.1.1 snmpwalk -v2c -c public <target> ZHONE-PHY-DS3-MIB::dsx3ConfigExtScrambleEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.5.10.2.1.1.1 snmpget -v2c -c public <target> ZHONE-PHY-DS3-MIB::dsx3ConfigExtScrambleEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.5.10.2.1.1.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dsx3ConfigExtScrambleEnabled.1
Start monitoring Zhone Technologies access equipment, DS3 interfaces (scrambling/E3-framing/ATM-framing config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-PHY-DS3-MIB::dsx3ConfigExtScrambleEnabled OID value, configure state conditions and alerts, and monitor any Zhone Technologies access equipment, DS3 interfaces (scrambling/E3-framing/ATM-framing config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.5 | zhonePhysical | Zhone |
| 1.3.6.1.4.1.5504.5.10 | zhoneDs3Ext | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.5.10.2 | dsx3ConfigExtTable | ZHONE-PHY-DS3-MIB |
| 1.3.6.1.4.1.5504.5.10.2.1 | dsx3ConfigExtEntry | ZHONE-PHY-DS3-MIB |
| 1.3.6.1.4.1.5504.5.10.2.1.1 | dsx3ConfigExtScrambleEnabled | ZHONE-PHY-DS3-MIB |