ZHONE-PHY-DS3-MIB :: dsx3ConfigExtE3Framing

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZHONE-PHY-DS3-MIB › dsx3ConfigExtE3Framing

dsx3ConfigExtE3Framing

Module: ZHONE-PHY-DS3-MIB

OID (symbolic): ZHONE-PHY-DS3-MIB::dsx3ConfigExtE3Framing

OID (numeric): 1.3.6.1.4.1.5504.5.10.2.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This field describes the status of the E3 Framing mode. If this field is e3FrameG832(2) then E3 Framing Format will be G832, if this field is e3FrameG751 then E3 Framing Format will be G751.

What is dsx3ConfigExtE3Framing?

This object selects the E3 framing standard used on a physical interface when operating in E3 mode, either the ITU-T G.832 framing format or the older G.751 format. An admin sets this to match whatever framing standard the far-end E3 equipment expects, since a mismatch here will prevent the link from synchronizing. For example, setting dsx3ConfigExtE3Framing to e3FrameG751(3) would be needed if connecting to legacy equipment that only supports the G.751 framing standard instead of the newer default G.832.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.5.10.2.1.2
snmpwalk -v2c -c public <target> ZHONE-PHY-DS3-MIB::dsx3ConfigExtE3Framing

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.5.10.2.1.2.1
snmpget -v2c -c public <target> ZHONE-PHY-DS3-MIB::dsx3ConfigExtE3Framing.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.5.10.2.1.2.1 i <value>

Start monitoring Zhone Technologies access equipment, DS3 interfaces (scrambling/E3-framing/ATM-framing config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-PHY-DS3-MIB::dsx3ConfigExtE3Framing OID value, configure state conditions and alerts, and monitor any Zhone Technologies access equipment, DS3 interfaces (scrambling/E3-framing/ATM-framing config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504ZhoneBITSTORM-HP-160-MIB
1.3.6.1.4.1.5504.5zhonePhysicalZhone
1.3.6.1.4.1.5504.5.10zhoneDs3ExtZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.5.10.2dsx3ConfigExtTableZHONE-PHY-DS3-MIB
1.3.6.1.4.1.5504.5.10.2.1dsx3ConfigExtEntryZHONE-PHY-DS3-MIB
1.3.6.1.4.1.5504.5.10.2.1.2dsx3ConfigExtE3FramingZHONE-PHY-DS3-MIB