All MIBs › ZESR-MIB › protocolMac
protocolMac
Module: ZESR-MIB
OID (symbolic): ZESR-MIB::protocolMac
OID (numeric): 1.3.6.1.4.1.3902.3.102.12.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The mac address mode of zesr, its default value is normal(0).
What is protocolMac?
Selects which MAC address mode ZESR uses for its ring protocol PDUs, normal(0, the default) or special(1), a setting that must match across all switches in the ring for them to recognize each other's control frames.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.12.1.2 snmpwalk -v2c -c public <target> ZESR-MIB::protocolMac
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.102.12.1.2.1 snmpget -v2c -c public <target> ZESR-MIB::protocolMac.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.102.12.1.2.1 i <value>
Start monitoring ZTE ZXR10 switch, ring-topology Ethernet (ring-protection config, switch-over-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZESR-MIB::protocolMac OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 switch, ring-topology Ethernet (ring-protection config, switch-over-count status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.102 | zxr10switch | Vct-Loopdetect-59-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.102.12 | zesr | ZESR-MIB |
| 1.3.6.1.4.1.3902.3.102.12.1 | zesrGeneralConfig | ZESR-MIB |
| 1.3.6.1.4.1.3902.3.102.12.1.2 | protocolMac | ZESR-MIB |