XYLO-PORTS-MIB :: anxpRtsSignal

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsXYLO-PORTS-MIBanxpRtsSignal

anxpRtsSignal

Module: XYLO-PORTS-MIB

OID (symbolic): XYLO-PORTS-MIB::anxpRtsSignal

OID (numeric): 1.3.6.1.4.1.15.2.3.7.1.87

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Controls the RTS (Request to Send) output control signal for this serial port. Valid set values are high or low. Setting the value on an idle port will produce an error.

What is anxpRtsSignal?

Directly drives this serial port's RTS (Request To Send) output signal high or low, the RTS counterpart of anxpDtrSignal; likewise errors out if the port is idle.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.87
snmpwalk -v2c -c public <target> XYLO-PORTS-MIB::anxpRtsSignal

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.87.1
snmpget -v2c -c public <target> XYLO-PORTS-MIB::anxpRtsSignal.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.3.7.1.87.1 i <value>

Start monitoring Xylogics remote access/terminal server (per-port session-status/modem-negotiation status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-PORTS-MIB::anxpRtsSignal OID value, configure state conditions and alerts, and monitor any Xylogics remote access/terminal server (per-port session-status/modem-negotiation status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.15xylogicsANNEX-MIB
1.3.6.1.4.1.15.2annexANNEX-MIB
1.3.6.1.4.1.15.2.3portsANNEX-MIB
1.3.6.1.4.1.15.2.3.7portTableANNEX-MIB
1.3.6.1.4.1.15.2.3.7.1portEntryANNEX-MIB
Numeric OIDNameModule
1.3.6.1.4.1.15.2.3.7.1.87anxpRtsSignalXYLO-PORTS-MIB