All MIBs › XYLO-PORTS-MIB › anxpParaPortSpeed
anxpParaPortSpeed
Module: XYLO-PORTS-MIB
OID (symbolic): XYLO-PORTS-MIB::anxpParaPortSpeed
OID (numeric): 1.3.6.1.4.1.15.2.4.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The printer speed on the Micro-Annex.
If this is an Annex-3 and the printer type is Centronics, the default is 'normal'. It should not be necessary to change the value of this parameter.
This MIB object corresponds to the NA/admin parallel port parameter 'printer_speed'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.4.2.1.6 snmpwalk -v2c -c public <target> XYLO-PORTS-MIB::anxpParaPortSpeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.4.2.1.6.1 snmpget -v2c -c public <target> XYLO-PORTS-MIB::anxpParaPortSpeed.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.4.2.1.6.1 i <value>
Start monitoring Xylogics remote access/terminal server (per-port session-status/modem-negotiation status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-PORTS-MIB::anxpParaPortSpeed OID value, configure state conditions and alerts, and monitor any Xylogics remote access/terminal server (per-port session-status/modem-negotiation status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.4 | parallelport | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.4.2 | anxpParaPortTable | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.4.2.1 | anxpParaPortEntry | ANNEX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15.2.4.2.1.6 | anxpParaPortSpeed | XYLO-PORTS-MIB |