All MIBs › XYLO-PORTS-MIB › anxpMultiSession
anxpMultiSession
Module: XYLO-PORTS-MIB
OID (symbolic): XYLO-PORTS-MIB::anxpMultiSession
OID (numeric): 1.3.6.1.4.1.15.2.3.7.1.103
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This parameter allows multisession operation to be managed on a per port basis. This MIB object corresponds to the NA/admin port parameter 'multisessions'. To enable the multisession capability on a port, it is also necessary to enable the service at the Annex level by setting the object anxMultiSession to the enable value. Only when the service is enabled at the Annex and at the port level will it take effect.
Note: The value of this object is written in the non-volatile memory. Thus the value takes in effect after reboot or resetting the port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.103 snmpwalk -v2c -c public <target> XYLO-PORTS-MIB::anxpMultiSession
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.103.1 snmpget -v2c -c public <target> XYLO-PORTS-MIB::anxpMultiSession.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.3.7.1.103.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3 | ports | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7 | portTable | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1 | portEntry | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1.103 | anxpMultiSession | XYLO-PORTS-MIB |