All MIBs › XYLO-PORTS-MIB › anxpModemStatus
anxpModemStatus
Module: XYLO-PORTS-MIB
OID (symbolic): XYLO-PORTS-MIB::anxpModemStatus
OID (numeric): 1.3.6.1.4.1.15.2.100.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object sets the status of the modem.
Explanation of the values are as follows:
1 - Make modem available if busied out.
2 - Busy out a modem.
3 - Boot-up diagnostic has marked this modem
as failed.
4 - Modem is handling a call.
This MIB object corresponds to the NA/admin
port parameter 'modem -m '.
This object valid for RA6300 only.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.100.2.1.4 snmpwalk -v2c -c public <target> XYLO-PORTS-MIB::anxpModemStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.100.2.1.4.1 snmpget -v2c -c public <target> XYLO-PORTS-MIB::anxpModemStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.100.2.1.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> anxpModemStatus.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.100 | anxModem | XYLO-MIB-SMI |
| 1.3.6.1.4.1.15.2.100.2 | anxpModemTable | XYLO-PORTS-MIB |
| 1.3.6.1.4.1.15.2.100.2.1 | anxpModemEntry | XYLO-PORTS-MIB |
| 1.3.6.1.4.1.15.2.100.2.1.4 | anxpModemStatus | XYLO-PORTS-MIB |