All MIBs › XYLO-PORTS-MIB › anxpModemReset
anxpModemReset
Module: XYLO-PORTS-MIB
OID (symbolic): XYLO-PORTS-MIB::anxpModemReset
OID (numeric): 1.3.6.1.4.1.15.2.100.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
A control to force the internal modem into a
clean, initial state, through a hardware
reset. In response to a get-request or
get-next-request, the agent always returns
'ready' as the value. Settingthe value to
execute(2) - Busy out modem. If the modem is
busy, then busy it after call is
completed.
For RA6300, this MIB object corresponds to the
NA/admin port parameter 'modem -u '.
This is valid only for T1CSMIM and RA6300
boards.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.100.2.1.3 snmpwalk -v2c -c public <target> XYLO-PORTS-MIB::anxpModemReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.100.2.1.3.1 snmpget -v2c -c public <target> XYLO-PORTS-MIB::anxpModemReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.100.2.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.100 | anxModem | XYLO-MIB-SMI |
| 1.3.6.1.4.1.15.2.100.2 | anxpModemTable | XYLO-PORTS-MIB |
| 1.3.6.1.4.1.15.2.100.2.1 | anxpModemEntry | XYLO-PORTS-MIB |
| 1.3.6.1.4.1.15.2.100.2.1.3 | anxpModemReset | XYLO-PORTS-MIB |