All MIBs › XYLO-PORTS-MIB › anxpLatAuthGroupVal
anxpLatAuthGroupVal
Module: XYLO-PORTS-MIB
OID (symbolic): XYLO-PORTS-MIB::anxpLatAuthGroupVal
OID (numeric): 1.3.6.1.4.1.15.2.3.7.1.66
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description:
This port parameter specifies which remote group codes are accessible to a user on a particular Annex port. Each port has its own set of group codes. The syntax is a series of numbers between 0 and 255, separated by commas and dashes, such as 1,5,100-255. The keywords 'all' and 'none' are also accepted and will enable all or disable all groups, respectively.
If the LAT protocol is not available on the Annex, sets of this object are ignored.
This MIB object corresponds to the NA/admin asynchronous port parameter 'authorized_groups'.
Note: You may use either this object or anxpLatAuthMap object to read or set the 'group_value' parameter.anxpLatAuthMap is preferred.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.66 snmpwalk -v2c -c public <target> XYLO-PORTS-MIB::anxpLatAuthGroupVal
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.66.1 snmpget -v2c -c public <target> XYLO-PORTS-MIB::anxpLatAuthGroupVal.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.3.7.1.66.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3 | ports | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7 | portTable | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1 | portEntry | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1.66 | anxpLatAuthGroupVal | XYLO-PORTS-MIB |