All MIBs › XYLO-PORTS-MIB › anxpAutoTimeout
anxpAutoTimeout
Module: XYLO-PORTS-MIB
OID (symbolic): XYLO-PORTS-MIB::anxpAutoTimeout
OID (numeric): 1.3.6.1.4.1.15.2.3.7.1.104
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This parameter allows a user to specify the maximum amount of time the annex should wait before dropping into cli mode. This parameter will specify the amount of time in seconds that the annex will wait for a auto-detect or auto-adapt port client's to identify itself as a PPP or CLI client before defaulting the user into CLI mode.
The default is 30 seconds.
This MIB object corresponds to the NA/admin asynchronous port parameter 'autodetect-timeout'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.104 snmpwalk -v2c -c public <target> XYLO-PORTS-MIB::anxpAutoTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.104.1 snmpget -v2c -c public <target> XYLO-PORTS-MIB::anxpAutoTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.3.7.1.104.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3 | ports | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7 | portTable | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1 | portEntry | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1.104 | anxpAutoTimeout | XYLO-PORTS-MIB |