All MIBs › XYLO-PORTS-MIB › anxpAutoPPPSecurity
anxpAutoPPPSecurity
Module: XYLO-PORTS-MIB
OID (symbolic): XYLO-PORTS-MIB::anxpAutoPPPSecurity
OID (numeric): 1.3.6.1.4.1.15.2.3.7.1.105
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This parameter should be used together with the ppp_security_protocol parameter. If this object is set to enable and if the user comes in as CLI and then goes into PPP mode, the annex behaves as if the ppp_security_protocol parameter was set to 'none'. If the user is auto-detected as PPP, the annex will use ppp_security_protocol as specified. Finally, settting this object to disable, will not affect the annex operation.
The default is disable(2).
This MIB object corresponds to the NA/admin asynchronous port parameter 'ppp_sec_auto'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.105 snmpwalk -v2c -c public <target> XYLO-PORTS-MIB::anxpAutoPPPSecurity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.3.7.1.105.1 snmpget -v2c -c public <target> XYLO-PORTS-MIB::anxpAutoPPPSecurity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.3.7.1.105.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> anxpAutoPPPSecurity.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3 | ports | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7 | portTable | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1 | portEntry | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.3.7.1.105 | anxpAutoPPPSecurity | XYLO-PORTS-MIB |