All MIBs › XYLO-PORTS-MIB › anxSyncForceCTS
anxSyncForceCTS
Module: XYLO-PORTS-MIB
OID (symbolic): XYLO-PORTS-MIB::anxSyncForceCTS
OID (numeric): 1.3.6.1.4.1.15.2.9.7.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Allows the control of CTS for the synchronous port. If disabled, CTS will assume the level of the interface. If the attached device does not assert CTS, this parameter must be set to enabled for proper operation. The default value is 'disabled'.
This MIB object corresponds to the NA/admin synchronous port parameter 'force_CTS'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.9.7.1.16 snmpwalk -v2c -c public <target> XYLO-PORTS-MIB::anxSyncForceCTS
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.9.7.1.16.1 snmpget -v2c -c public <target> XYLO-PORTS-MIB::anxSyncForceCTS.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.9.7.1.16.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.9 | anxsyncports | XYLO-MIB-SMI |
| 1.3.6.1.4.1.15.2.9.7 | anxSyncTable | XYLO-PORTS-MIB |
| 1.3.6.1.4.1.15.2.9.7.1 | anxSyncEntry | XYLO-PORTS-MIB |
| 1.3.6.1.4.1.15.2.9.7.1.16 | anxSyncForceCTS | XYLO-PORTS-MIB |