All MIBs › XYLO-MODEM-MIB › mdmCtlState
mdmCtlState
Module: XYLO-MODEM-MIB
OID (symbolic): XYLO-MODEM-MIB::mdmCtlState
OID (numeric): 1.3.6.1.4.1.15.2.100.4.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Command to put a modem back into service (if busied out) or to put the modem out of service (if available). Busying out a modem will take the modem out of service and no calls will be assigned to this modem. This object is similar NA/admin parameter busy_out. This object can be seen after setting up a modem list. This object replaces anxpModemStatus object.
What is mdmCtlState?
This read-write enumerated object both reports and lets an admin change a modem's service state: busy(1), available(2), busiedOut(3), failed(4), crashed(5), or outOfService(6), replacing the older anxpModemStatus object. Setting it to busiedOut(3) manually pulls a modem out of the call-assignment pool without a reboot, corresponding to the NA/admin 'busy_out' parameter, useful before physical maintenance. An admin might set mdmCtlState to available(2) to bring a modem that was previously busied out back into rotation for new calls.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.100.4.3.1.2 snmpwalk -v2c -c public <target> XYLO-MODEM-MIB::mdmCtlState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.100.4.3.1.2.1 snmpget -v2c -c public <target> XYLO-MODEM-MIB::mdmCtlState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15.2.100.4.3.1.2.1 i <value>
Start monitoring Xylogics modem pool / remote access server (per-modem call-state/line-quality status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-MODEM-MIB::mdmCtlState OID value, configure state conditions and alerts, and monitor any Xylogics modem pool / remote access server (per-modem call-state/line-quality status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.100 | anxModem | XYLO-MIB-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15.2.100.4 | mdmCtlObjects | XYLO-MODEM-MIB |
| 1.3.6.1.4.1.15.2.100.4.3 | mdmCtlTable | XYLO-MODEM-MIB |
| 1.3.6.1.4.1.15.2.100.4.3.1 | mdmCtlEntry | XYLO-MODEM-MIB |
| 1.3.6.1.4.1.15.2.100.4.3.1.2 | mdmCtlState | XYLO-MODEM-MIB |